Search results

I would personally use the correct rated RCD and make a small box out of it, that way if something does go wrong its a quick flip. You can then use a bus bar to distribute the power between them. It is a more expensive route to go down but is imo a cleaner look

Hello All, Recently had a bunch of work done to the defender, some of which on the suspension (Polly bushes fitted) Something new since picking it up, when I come off the power going above about 35mph, theres a grumbling noise, lasts about 3-5 seconds, maybe from the Front - But hard to tell...

An Update: Head's on, All injectors in, managed to snap one of the brand new studs (again) Started up after a little encouragement and cranking, cracking the injector fuel bolts and allowing it to prime helped it along massively. Rockers were wayyyyy out so adjusted them using my amazing...

Looking at the markings, I would say its had a skim before at some point in its life. I will most likely sell it on to someone who wants to invest the time into it, it does need new valve stem seals as these were on their way out, They do get two of the injector studs included as I lost the...

I Have just the same block in my 1986, I'll probs end up sticking bullets into the end of it if I need power. From the jumble of cables that appear out my dash: Red / White trace - Sidelights Red / Orange - Sidelights White - Switched + Purple - V+ Black - Gnd Green - Switched + Black / Red -...

An Update: Pulled the head off, HG blown between Cl 2 and 3, No biggie they're not that expensive. Cleaned off the head, Got out my engineers ruler, shone a light through, annndd its warped. Yay! So new head ordered with head bolts, new thermostat housing gasket and a bundle of other parts...

I Can't see any obvious leaks around the P, it all looks pretty dry around there, Changing the head gasket doesn't look like it would be the most complex of jobs, but I am a bit worried of what I will find underneath, cracked or warped head in particular. The only thing I'm nervous is setting...

Recently I bought myself a 1986 90 with a 300tdi retrofitted It wasn't in the best shape when I picked it up but it drove home the 100 miles fairly well, for the first 10 miles lots of blue smoke as it hadn't been used for a while. Noticed over the next week doing maintenance and trying to find...