Search results

I'll investigate this further, thank you

Sorry for the late reply, been away from the laptop. No the TC light comes on along with the buzz from the dash when the wheel starts to spin but I don't get anything else coming up on the dash. Have I miss read some things in terms of the ETC having a light as well?

I don't have the option for diff lock on the selector so best case would be having to install some mechanism to do so. I'll have a look underneath later this week and see if it has it or not. The person I got it off said it has but without looking who knows!

Thank you for your response, Sorry the ETC light wasnt on, never seen it come on. I only get the TC with the buzz. The car is 2001. i'm running 245/65/16, not sure if the previous owner when had the ecu done if the tyre sizes had been changed within

Sorry I hadn't updated it, I've changed to a discovery 2 now after many issues with the freelander 2 when came to taking the sheep trailer out. It's a 10p engine, if I've read things right there's a high chance it may have the linkage but would need to investigate properly

Thank you for that and coming back to me, I had thought about maybe sending you a message as you were so helpful before. That's an interesting read which you have sent me there, i do wonder if the etc isn't working properly or maybe due to me trying to put some revs it didn't like it as I...

Evening all, Been out logging today with the d2 and had an issue trying to get up a grassey slope and seemed to have the front wheels spinning, wasn't loaded so weight of landy was basic. Had the TC light on, in low range and making the buzzing noise but just would spin. The other 3 wheels...

So been using the disco a fair bit today moving trailers around and have noticed when I stand still the temp from the sensor goes up and sticks around 70. As soon as I start driving it drops to around 40 so I wonder if it's being effected by wind as when I stop again and turn off. When turn back...

Blimey, that's fantastic. My background is electrics so these are like a dream haha Thanks so much again

That's a good idea, I'll keep an eye on it tomorrow morning as got a little longer drive to the farm. Hopefully have a better idea once see it climb from quarter to half

That makes sense, I've seen a lot of comments about using the RAVE. Left it on my Dropbox so will have access to that everywhere now even under the landy. It's a 2001 td5 manual, sadly no cdl. Havnt checked for linkage yet mind but got more to sort out first on it. Would of been nice the...

Wow, that's amazing thank you so much, that's a lot more detailed than the haynes manual

O that's a little worrying. Normally travel about 15-20 mins to work so not massively long journeys, if I stop and turn the engine off once get back in and turn back on its normally up around the 70-80 mark but then goes down to about 55-65 when started to drive again. I'd have to see if the...

Without sounding silly, workshop manual? All I've got is the haynes manual!! Thanks for that image. I've tried using the hill descent, and just got the beep and flashing dash light, from this discovered there was no wiring loom which also explained why there was no reverse lights as well...

Hi everyone So it seems my hi/low switch has gone, so going to order up a new one. I cant seem to find anything online regarding replacing and can see its fairly straight forward in the sense of unscrew the old and replace with the new but do I need to drain down the transfer box to switch it over?

Thank you for your advise, I've been running it with the sensor on and monitoring the temp. On average it sits around 50 most days and sometimes if using little more sits about 70. Do you think it may of had an upgraded intercooler hence the temps stay fairly low? Thanks

Cheers pal, I had put it under the stretch bolt as had to go out. It only read max 75 while out. I've moved it now beneath the lifting bracket you mentioned. Hopefully nothing will come from that expansion bolt. While doing it I noticed the blot still has its barcode sticker on, wonder if that...

So the sensors turned up, managed to run cable from engine bay, would this bolt on the head be alright or is there a better one somewhere? Have you herd of anyone 3d printing mounts or something for the screen, going to get it in for now but would be nice getting a mount for it somewhere

Thanks for that, sorry I forgot to mention it's a manual. I think I'll be doing that more often, can't risk blowing it up just to move some sheep about

It'll come next week the temp stat you've mentioned about buying, before I order it I see on another post you've mentioned about exhaust temp etc as I put in egt temp in the seatch and a post came up your'd done before. Is there something which has both read outs on which could mount on the...