Search results

The wheels are hitting the back/rear side of rear inner arches I believe I have a 2 inch lift on heavy duty springs I only use for off road no anti roll bars fitted

Hey guys, started using the discovery for off road recently but having an issue where my tyres hit the inside of rear arches and tear the inner arches to bits. would extended bump stops fix this problem? I know a lot say extended bump stops aren’t used to reduce articulation anything else I...

The winch was only a proper cheapo maxtra one. It can’t go far enough forward to line the bolt holes up

Hey guys, a winch I have didn’t end up fitting on my bumper so wondered if anyone knew what type/brand/sort of winch I need? the bumper is a discover 1 tubular winch number, branded “venom”. Came on the truck when I got it, but have found same bumper on eBay but got no reply from sellers in...

I believe fitting a turbo cartridge myself will work out quite abit cheaper then sending it off to be rebuilt just struggling to find a cartridge atm

Whines when under load and damage to the fins

That’s for a 300tdi sadly :(

A lot of the cheaper ones seem to be 300tdi, assuming these won’t fit the 200tdi turbo I’ve contacted turbo dynamics for a quote but I believe will work out cheaper to buy the cartridge and fit myself

Hey guys, I’ve read most of the topics on this subject but a lot of the links are out of date so thought I’d make a new post. I’m after a new cartridge to rebuild my defender 200tdi turbo. Not after anything more then just bog standard unit. Anyone know the current cheapest place to find one...

Old school thread bump but saves making another I’ve picked one of these maxtra winch’s up for a tenner. I have zero winch experience so just wondered how I’d go about testing if it works? It’s completely removed and just sat on the floor are the wires done correctly? I have a small red and...

Would it not cause swaft/metal to end up in the cam casing drilling and tapping without removing the whole cover?

Pictures of what I have and what I want

Hey guys, I’ve been looking to fit a timing case breather, I don’t really want to drill and tap as don’t want to take the whole case of my question is would removing my air con and it’s tensioner for a shorter belt open up the spot for one of the breather plate kits to bolt on or are the...

It’s more so the rears I’m worried about I’d much rather a proper job with the doors welded back up after cutting rather then filling the gap with silicon, sadly I cannot weld lol

Anyone in the Hampshire area got experience in cutting the arches to fit flat dog arch extensions on a 5 door? to a decent standard, I don’t really want to mess it up and risk parts rusting out in the future

Cheers guys, the leaks pretty bad, leaving puddles dripping constantly :( not sure what’s caused it, was fine few days ago and doesn’t get used

Brilliant, does anyone have the exact name of the flange, seal and parts I need to order as looking online seems to be a wide variety of different ones

The video seems to show a different way then what’s mentioned above?

Hey guys, ive got a constant leaking drip, check photo for location. Seems to be from where front prop goes into transfer box anyone had experience in this and know the process to stop the leak? It’s bad enough that I want to sort it out ASAP. What will be required to fix the issue and how...

Simular but the T piece seems fine it’s just the rubber pipe that connects to it