Search results

Thank you for the reply Griff. Not noticed any markings on the pipes, never looked of course, would be good to know which wheel to bleed though, makes it easy. Going to cut through a ring spanner to fit over the pipe first then onto the nut, an open ender tends to spring so you cannot really...

Afternoon all. Thought I would ask a question which you could discuss during lunch/dinner tomorrow. My ABS pump has sprung a leak from one of the pipes on top, got the red flashing light and thought it was just low fluid because of pad wear. Managed to tighten the pipe a little and it is less...

Hello I bought an icarsoft to identify a three amigos fault, was the shuttle valve which I had to bypass. Fortunately I knew it would not work on othe modules. I would send it back for a credit if you can, if you make a case with ebay they will probably back you providing the original ad did...

Just had another look, bush is fine no play at all, just need to find the correct dust covers so easy job I guess.

Well it looks like the rose joint on the bottom end of the ace ram, dust cover looks like new on the outside but is a little perished on the inside, used a mirror to see it. hardly a big issue! Has anyone managed to draw this out using stud iron and a socket over the joint, not sure it would...

Thanks for info gentlemen, especially Si ----- fery, unit has been off and reinstalled using lots of joint sealer hylomar or silicoln, it was everywhere so may be in the filter, will take a look. I do not have Nanocom but do have a icarsoft reader which does the supension, used it a few times...

Yes I have ACE, kept it going because I like it, did replace these boots a few years ago, I will take a look tomorrow. The garage I went to is a small country set up, they do many 4wd so I thought if it was ACE it would be described as is. One of the failures was the Fuel Pressure Regulator...

Evening all. Not been on here for a while, had my Discovery TD5 for 13 years or so, managed all the usual problems together some unusual faults. Had to go to a new mot station as my normal garage owner has retired. Failed on a few things and a to do list which looks like the dead sea scrolls...