Search results

Evening , I have been search the treads but not found an answer to my question yet , my disco rear diff (3bolt flange) is toast and I have been given a 4 bolt flange diff and rear prop. Can you just bolt these up and all will be well ? Thanks in advance

Evening all , problem is now fixed with two new front hubs .

Update this evening , I put the old BCU unit on and the SLABS ecm . Fitted a new hub and this seems to have cured the issue on the right hand side. After a short drive ABS light back on now on the left side. Planing on fitting a new hub on the other side and hopefully that should cure this...

The disco has had the BCU changed recently so I will definitely take a look.

Update on progress , one thing I said earlier on is incorrect , the HDC & TC light do not come on at all even when ignition is turned to the second location so I stripped the cluster down to see if someone had blocked the lights but they were clear. I got my hands on another SLABS ecm but just...

Thank you sierrafery

Okay thank you , I will see if I can find another one to try

Yes they come on and go out

Hi Sierrafery, hope your well ? No TC light when it started to kick in. Yes only hand brake light and ABS light , none of the others are on. Yes the code is still on, I can clear it with the nano but comes straight back up. Yes did start to think it could be the hub but wanted to check and...

Afternoon all , just after a little advice. I have recently changed the ball joints on my disco 2 2003 , all went well until i tried to drive it and the traction control kicked in when i started to drive it (5 - 10 mph) and when turning right. So got the nano out and checked for fault codes and...

Hi All, I have an old range rover that will select every gear but reverse? has anyone else ever had this issue or does someone know the fix ?

Hi all , I am just in the process of changing my head gasket again. Question , when I did it the first time it had plastic dowels in which I changed for steel dowels , now I think I was told that some TD5 engines need to have the plastic ones fitted and some can have the steel ones fitted , am I...

hi guys I have the above fault code shutting down my engine at 2500 to 3000 rpm. I have just changed the injector loom , cleaned the ECM connections and removed the cover off the ECU to check for oil with none found. Anyone got any ideas ?

For anyone that reads the thread I am creating a new one titled Injector 5 peak charge short. If this is the wrong thing to do please let me know

Thank you mate , I have just got a reader to understand the issue and it has come up with a fault : Injector 5 peak charge short ? Any ideas ? Cheers adam

Can you do all this with a nanocom ? Cheers

Hi guys , so after some googling it looks like I may have an ecu fault so it needs to be replaced. Is it just a case of buying a second hand Ecu and re programming the injector numbers in it ? Cheers

Hi guys just brought my first land rover TD5 52 plate. Now need to get some advice on the little issues I have found with it and then have some fun Cheers adam