Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. brianp38dse

    P38A Front Suspension - "wobbles"

    to remove the old ones run a drill throw the bush a couple of times towards the outside the outside of the bush is plastic
  2. brianp38dse

    P38A Front Suspension - "wobbles"

    if using a press you will need the tool to do it the bushes are bigger than the hole in the arm and need pushing through a tappered tool to fit.
  3. brianp38dse

    Instrument replacement and mileage anomaly

    rikthepik at callrover might be worth a call he may well be able to sort it
  4. brianp38dse

    Correct coolant for a 1999/T P38 (Thor)

    Tiss good for washing large black vans like mine :vb-biggrin: no more water marks:vb-tup:
  5. brianp38dse

    Correct coolant for a 1999/T P38 (Thor)

    The salt in a water softner is only used to back flush and clean the resin that does the softning bit, the bit they say was bad for you was a slight sodium content but they have decided that it is ok to drink now, i know all this as i have been subbing for Kinetico fitting softners for nearly a...
  6. brianp38dse

    P38A Horn connector

    It would make the idiots walking along on there phone jump a bit :vb-biggrin:
  7. brianp38dse

    P38A Horn connector

    How`s about a set of these Gobesty Air Horn 12V, 600DB Super Loud Car Horn, Double Tube Train Horn with Compressor, Airhorn for Truck, Train, Car, Van (Silver) Brand: Gobesty 3.8 3.8 out of 5 stars 11 ratings £17.99£17.99 Save 5% on any 4...
  8. brianp38dse

    Wiring diagram : 2005 L322 HSE TD6

    Rave is the JLR workshop manual and can be downloaded free https://www.dropbox.com/sh/o9m2uyenqtjmcm3/AAAzvtCBbo9nPJUtqD9lOk6ta?dl=0
  9. brianp38dse

    Recommend me a grease gun please..

    Wanner every day have a couple, they just work
  10. brianp38dse

    P38A The arrival of a P38

    If the brake lines to the back have never been changed, replace them as they will be rusty where you can not see them they are atleast 20years old, here are some pics of mine they were not leaking but crumbled when you tried to move the pipes
  11. brianp38dse

    P38 DSE 1996 - Need RAVE or similar for M51 Engine

    Try this link it should all be in there https://www.dropbox.com/sh/o9m2uyenqtjmcm3/AAAzvtCBbo9nPJUtqD9lOk6ta?dl=0
  12. brianp38dse

    P38A Prices are up!

    Humm iffy now if if we were talking a Yorky that would be different :vb-biggrin:
  13. brianp38dse

    P38A Prices are up!

    And a bag of wine! blimey i would expect some midget gems and a curlywurly as well.
  14. brianp38dse

    P38A Prices are up!

    Lights are all wrong for that year:rolleyes:
  15. brianp38dse

    P38 BeCM locked?

    Sounds like it needs the engine immobilizer code from the ecu writing to the becm. if they dont match it will turn over but not start.
  16. brianp38dse

    What did you do with your Range Rover today

    I have used stainless braided tap flexies as oil cooler pipes lasted about 30 years only changed as one had worn through rubbing against the battery tray on my Cortina.
  17. brianp38dse

    What did you do with your Range Rover today

    i have never purchased or heard of 15mm imperial olives always just use standard ones, 5/8 is slightly bigger than 15mm so the pipe may not fit in the fitting but the fitting could be machined to fit, it should take the pressure no problem as the oil pressure is less than some mains water. i may...
  18. brianp38dse

    P38A V8 waterpump

    I am glad Airtex is being mentioned i fitted that make to my Renault master van the weekend and went with that make as i had heard of them:)
  19. brianp38dse

    P38A The arrival of a P38

    I take it as no4 injector with sensor at which point it should run on default setting with it unplugged.
Back
Top