Search results

I was going to try it myself. Does anyone have a diagram of where this sensor is located and how to replace it?

I had to eventually take it to a local shop who cleared all codes that was caused by the diff mount. They then drove it until the fault code was back and showed as input speed sensor. This is the only shop in my area that has experience with land rover so he seamed to know what he was talking...

I found that the issue is the input speed sensor. Looking online for the part but can't find one that is sure match. Does anyone know the part number for it?

Just finished testing them. all were very close to specifications with the exception of 3 that I could not get a reading on. The meter jumped up and down and would not give a reading. The three that the meter would not read are Shift solenoid valve A, line pressure solenoid valve, and shift...

I will test the solenoid as soon as I can and post the results

I cleaned the mass air flow sensor which fixed the issue with the idle. Replaced the dif mount which was in very bad shape which fixed the "clunk". It drove great for a test drive then started down shifting rough again, and displayed F4 rather than drive. The next project i plan to complete is...

Thanks for all the help. Plan to work on it Saterday. I will post the results

I went to an auto parts store and had the codes read

Thanks alot. I would like to do it myself as much as possible. I do have a friend that is a machanic to help with the repairs. Im in Missouri and not near a LR deler so I will need to order an parts. Just want to know what parts I need to order to address the issues.

And its an automatic. Is there a way to tell if it is the speed sensor?

Yes its a V6 SE. Local shop told me it could be the transmission speed sensor. It shifts fine until your slowing to a stop then its a rough downshift. Could the speed sensor be what caused the codes minus the mass air flow? It runs great once you get it warmed up only idles poorly when you...

I recently purchased an 03 freelander with a recent engine replacement. It had the "bang" sound from the rear that I belive to be a bushing. Now the engine light is on and reads the following codes. Not sure where to start to fix this issue and we do not have a LR shop in the area. They...