Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. ryan_1993

    Began the underseal removal off my 1999 300 Tdi

    It’s a job I’ve been putting off for four years—stripping the underseal off my chassis. Now that I have access to an outdoor ramp, it’s made the job much easier since I can stand underneath it. I’ve decided not to strip the entire chassis, as the front is still in great condition with no...
  2. ryan_1993

    Disco 2 Transfer box in a 300 TDi 90 CSW

    Got the chance to purchase a recon D2 Transfer box with diff lock from a friend at very good mates rates. just thinking though am I going to run into any kind of issues with the Speedo cable here? From what I understand the Disco is electrical and my Defender is cable or does the port/connector...
  3. ryan_1993

    Defender 300 Tdi weird noises under boost

    The first noise you hear on the video started a while ago, maybe back in May or June, but it goes away so quickly I never thought it to be an issue tbh thats more like a wooshing sound, but yesterday that high pitch noise (almost sounds a bit like speaker electrical buzz occurred) Only under...
  4. ryan_1993

    Defender 300 engine loom bulkhead dash connector pinout

    Does anyone know the pin out what controls the Diff lock light on engine loom in the master socket on bulkhead Had to swap my engine loom got all the other connectors going all spot on other than the Diff lock light. We suspect possibly one of the pins are maybe wrong in the new dash bulkhead...
  5. ryan_1993

    Fitting a new engine loom 300 tdi

    Good morning So after the old EGR wire coming off the third point of the alternator fully melted through my old engine loom I have had to order a new one, it still works fine the loom, but I am worried that long term it has compromised the integrity of it On my model it came with a factory...
  6. ryan_1993

    Engine loom has melted on my 300 tdi

    Just been in Scotland and last night my engine loom melted. Managed to get to Gretna and decided it wasn’t worth the risk so got it recovered home. The engine loom has completely melted and I am not sure why. We have done heat gasket last weekend so wondering if some wires got disturbed...
  7. ryan_1993

    Defender 90 CSW - Rear door brake light not working

    My defender had its roof off to repaint a few weeks back. Since getting it back noticed the centre rear break light isn’t working. I have tested the fitting itself with a voltage tester with breaks engaged and the wires and bulb holder are both dead unfortunately, no volts When i was putting...
  8. ryan_1993

    1999 300 TDI Land Rover Defender 90 Struggle to Start

    Hello i have been away in the dales and since being here my 300 has been playing up a bit and struggling to start. Differences from home We are about 1200 foot up on a hill side its also been exceptionally wet constant rain and cold, i put in some diesel from a local garage too, but this is...
  9. ryan_1993

    The best 300 tdi coolant

    So my defender was involved in an accident and it involved a new radiator to be installed. The garage has done an excellent job. However I’ve noticed that the coolant that’s been put in it is red and I’ve heard that red can be very bad for an engine with an aluminium head and it can cause...
  10. ryan_1993

    Hella Comet 500 Spotlights upside down on A-Bar

    I would like to get some Hella Comet 500 spots and i really like the retro type cover it comes with them in black and white. Does anyone know if the lights are okay to be mounted upside down on a defender front A Bar and will the covers also mount correctly so the text is the right away up?
  11. ryan_1993

    Having a white roof on a Factory 90 CSW

    Hi there, Thinking of putting a white roof on my 90 Its had quite a dull finish and since I was out working overseas it got left for a little while and on my return noticed the roof started to micro blister slightly in places in the cold weather. I was thinking of giving it a white roof as I...
  12. ryan_1993

    300 tdi Defender 90 Rear Diff Pinion Seal Replaced now leaking horrifically

    Had a bit of a weap on my rear diff pinion seal thought best get that sorted. Got the part and we swapped it out last night. Part number we used was a FTC5258G. However after the replacement the leak is now sadly 10 times worse. This was a pic before replacement after about 6 weeks since I...
  13. ryan_1993

    Understanding a few 1990s Land Rover Trim/Options for the CSW (Research)

    Hi All, I am doing some research for a YouTube video I am making as I have noticed some sellers more recently seem to be trying to sell converted hard top vans as genuine CSW's, but in reality are often pretty crudely converted. Obviously, as you do tend to pay a bit of a premium for the...
  14. ryan_1993

    Steering box leak on my 90

    Noticed my steering box seems to have recently developed a bit of a wet patch on the underside and a slight drip of rusty looking fluid on the floor this morning The black power steering reservoir seems to be full though and at the normal level. Is it worth trying to use some of that stop leak...
  15. ryan_1993

    BF AT KO2 265 75 R16 tyres on my 300 TDI 90 CSW

    Picked up a brand new set of five at billing as I recently discovered that the ones on mine are original KOs (not 2s) dated from late 2002 so are dangerous to use now being 20 plus years old. The ones on right now are 235 85 R16 but the ones I bought are 265 75 16 Am i going to run into any...
  16. ryan_1993

    Changed my LT230 oil today found a weird flaw in the drain plug casting

    So, it was the last fluid to get done on my landy everything else was done last summer. after the oil drained off I noticed this sharp metal edge just on the inside of the drain plug casing anyone ever seen this type of poor casting before? unsure when this oil was last changed, but there...
  17. ryan_1993

    300 tdi Diff lock kept coming out going up a rocky muddy hill yesterday

    My diff lock has always been temperamental tbh. When I first got my CSW I don't think it had ever been in low range as it was basically fused into 4WH. My mate freed it up and it now works good in low range. However, the diff lock gear knob was always kind floppy after this. I've never really...
  18. ryan_1993

    Defender 90 300 Tdi - Coolant Recommendation Thread

    Hi all, Seen a few postings regarding coolant on here, but many of them are over 10 or 12 years old now. Not sure if things have moved on in that time or not? I am going to be flushing my radiator and cooling system in coming weeks and replacing my anti-freeze. I am not entirely sure what I...
  19. ryan_1993

    Looking at Intercooler Options (nothing too crazy)

    So was told by a mate other day that my Intercooler is looking a bit worse for wear, (it definitely looks a bit shabby and tired) I was thinking of replacing it or upgrading it, but tbh I don't know what to go for. The prices seem to vary wildly from about £100 for something like this...
  20. ryan_1993

    Defender 90 CSW - Help with Motorised Headlights

    About a month ago I fitted new light surrounds along with the standard Defender side lights (replaced my enlarged NAS spec ones). I have been away in Canada for the last month and just arrived back home before Christmas, so I have not really driven my Defender all too much However, I noticed a...
Back
Top