Search results

Hi all, I trust you're all keeping well. Long time no posts but I have a slight misting on one pipe,see pic. Q1. Does anyone know if the pipe goes to the front ram or the pump (haven't had time to have a proper look but think it's the top one from the valve block). Q2. Anyone know the part no. ...

Hi all, has anyone fitted one of the Sealey battery monitoring devices (to any vehicle) ? I fitted one a few weeks back & it tells me my D2 battery is losing about 22% of it charge overnight e.g went the Goodwood Revival Sunday & got back about 19.00 & as you would expect the app on my phone for...

Hi all, I've gone to refit the propshaft (after g/box repair) & as it was off the road for so long the uj's on the rear prop are stiff & one locks after a small amount of movement so has anyone replaced the uj's without any vibration problems afterwards or shall I try & find a s/h one ? Any...

Hi all, after my g/box rebuild (reverse band). Plugged in my Foxwell (with it in the auto transmission mode) to go through the oil level check procedure as per Rave. When the oil temp when reading 35-40 degrees I cycled through the gears a couple of times then checked the level but the reading...

Hi all, are there any dedicated aux battery boxes for a D2 TD5 or are they generic items ? I've seen pics of installations but not a break down or links to anything. So if anyone knows of a box that will fit ( on the bulkhead where the optional FBH would go) it would be very much appreciated...

Hi all, plugged my Foxwell in earlier & found this in the ABS 'read codes' not sure when it was logged & I've not had any amigos on so is this just an oddity? I cleared the DTC's then did an active test & all 4 passed. What's the cure if this shows up again ? Thanks in advance.

Hi all, I've replaced the condenser rad (can't get system re gassed until Monday) & finished it all today (changed oil & filters + partially drained coolant enough to just remove the two top hose connections to the coolant rail on the side of the cyl head). Put all the fluids back in but when I...

Hi all, I have drilled & tapped the two holes for the eng. cover (on the turbo side) to take 8mm helicoil inserts, the problem is because it's a blind hole (which I've drilled as deep as possible) the taper on the kits tap bottoms out & I don't think the inserts,which are only 8mm long, will go...

Hi all, has anyone got two working A post tweeters for a D2 ? Mine have the p/no xqn000010 on them, if you please let me know, many thanks.

Hi all, I offered a couple of rear D2 jump seats to a member a couple of weeks ago & my better half dug them out today but I can't remember who wanted them :rolleyes: so if the member sees this then great or if anyone can remember the original post please post a link for me to let them know...

Hi all, looking at the mudflaps at the rear end of the side steps the top fixing (which is plenty long enough) looks like it should go through the conveniently placed hole in the chassis outrigger but it would mean bending the other bracket (circled in pic), any thoughts ?

Anyone heard if & why the spares day has been cancelled this Sunday 21st ?

https://www.ebay.co.uk/itm/284261518201?fits=Car+Make%3ALand+Rover%7CPlat_Gen%3AMK+II%7CModel%3ADiscovery&epid=27012454015&itmmeta=01HTYX4MEC5VM9N6Z3WAMRZZ41&hash=item422f4e8b79:g:ax0AAOSwF3VgeuG9&itmprp=enc%3AAQAJAAABIIYYykYDmiCJSK2CS%2BK%2BtgplYmsysVqgsgS5WVcbrqQMFq87tSH%2BTvfj4LpIr3b2FwYWvzGFV...

Hi all, D2 & FL1 owner here, stop hissing children :). Today to help out this chap I've used my Foxwell NT530 to reset the service notification on a MY2009 4.0 V8, it did all the auto VIN recognition stuff & although the Foxwell went through the motions to where it said completed the Rangies...

Hi all, are the rear most bushes in the radius arm a different construction from the front bush ? I'm replacing mine & the front bush is the usual metalastic jobbie whilst the rear two seem to have plastic on the o/s of the bush, see pics (I've only removed the front one at the moment), Thanks...

Hi all, does some know or would they be kind enough (by looking at theirs) please to let me know if the small casting 'pip' on the xyz switch body lines up with the mark on the white plastic collar when it's in N or D, see pic. Many thanks in advance.

Hi all, I've got near to finishing my auto g/box refit & now need help with the inhibitor switch alignment. I've switched the ign on & it's flashing F4 in the display & the red on light is illuminated by P1 on the PRND321 by the selector lever. It was left in park when g/box was removed. So do...

Hi all, 04 TD4 face lift, can anyone tell if the bit arrowed in the pics is where the g/box breather tube should be placed please ? It's been more than a year since I stripped it for the reverse band to be doneo_O & I can't remember if it was in that convenient lug on the fuel cooler valve...

Hi all, I picked up a 'wood effect' ATC unit today & just wondered if they are all the same ? The one I got today, see pic is p/no. JFC102350 & the original one is in JFC000170. I know both these no's have superceded so, providing the 'new' one is OK will it work? One for @sierrafery maybe :)...

Hi all, I don’t suppose anyone knows the part no. for the oval shaped rubber grommet that covers the access hole in the metal plate between the g/box & block please ? (see pic)I can't find a number for it (unless someone has a spare/unused one kicking about, please let me know). The one on...