Search results

I’ll take a picture to show mine (funarrr, funarrrr). Kinda of a specialist need, RC is proper off-roading with a max of 40 kmph / 25 mph. Hence lots of cooling required!

The misfire has suddenly started, but I don’t disagree it could be the cam. Looking at changing that in the next 6 months. The engine starts and ticks over beautifully. Just bad misfire in the top third of the rev range and poor power (compared to a couple of weeks ago) plus engine running...

The car came with a set of Champions in, and a new set of 8x N9YC Champions plus a new set of 8x BPR8ES. I did a plug change to the new champions (no difference to the misfire at high revs / under load) and yesterday changed to the NGKs. It didn’t want to tick over when cold on the NGKs but...

My viscous pulls through the rad from the engine side, so the twin fans I have at the front blow air through to assist. What little air flow I get at max revs, whilst doing 10 kmph through a massive donga (oooooh, errrrrr missus) is going the same way. The best idea is a shroud on the SPAL...

£146, I have a shedload of batts already… https://www.powertoolmate.co.uk/kit-builder/milwaukee-18v/grease-gun/milwaukee-m18gg-0-18v-heavy-duty-grease-gun-body-only.htm I suspect the M12 version at £99 will do everything you need...

Love my Milwaukee M18 grease gun. Works everytime, unlike every manual one I have ever had.

Lordy! https://www.landyzone.co.uk/land-rover/missfire-and-popping.192121/page-2

Oooooo, hold on. I search for ‘spark plug’ but I have now found this old timer… https://www.landyzone.co.uk/land-rover/ngk-or-champion.95499/

I have always used NGK plugs and plug caps since running a Suzuki TS50ER (restricted, but unrestricted to 42mph back in the day). An RD125DX, a GT250, a GSX750, a ZXR750H2 and a GSXR1000K3 followed… all on NGK. Even the current Husaberg TE300 runs NGKs. The Hilux and Landcruisers don’t count...

Do we have a AI bot around?

Does this help? https://rimmerbros.com/Item--i-GRID800035

First try with a laptop on sponsors… 😀

They seem to use hyperspark as their ignition. Love the look of the sniper 2 as a fuel injection replacement. https://www.holley.com/products/ignition/hyperspark_ignition_for_sniper_efi/

Interesting…

Discussion here on a Series 3: https://www.landyzone.co.uk/land-rover/electronic-ignition-123-vs-britpart.355918/#post-4945249 And a good (old) discussion here: https://forum.britishv8.org/read.php?6,30614,page=1 However after messing about with the standard ignition on my 3.9EFi, I wondered...

I went the whole hog and bought a Momo for my Disco. More room is essential, I think that looks fine!

I can see you have the turbo now, I was just going to say that Andrew at Allisport is a mine of information (fairly obvious) and a dang nice & helpful bloke. You won’t go wrong with anything with their brand on (or associated with). It looks like you have a cracker of a 90 there, but show...

I think that is what Tonks meant?

Yes, indeed! Turn that picture 90 degrees anticlockwise and the fan would be below them.

New HT leads and new fuel filter fitted. Just waiting for the new distributor cap and rotor to arrive. I changed the plugs (lordy!) for new and all the screw on caps were loose, they are not now. It is firing better but not perfect yet. The old plugs were very dark but gaps were correct and...