Search results

The back of the cab is held by many brackets braces under the cab those in turn hold the bed in place to the frame. In a standard pickup HC would have some differences? I removed a gas filter from the 84 PU when I got it fitted with a diesel.

I am ordering what is rotten wings & supports, the rear crossmember is also bad shape. Seat belt supports none of these items are reusable. & the rear wing stays just because I am from states paying postage. There are some good reasons this truck was not fixed previously!

Thank you I will look through what else they may have before ordering.

YRM okay looks like this & looks like they have the bits to bolt on for body attachment!,, REAR CHASSIS OUTRIGGER – LR DEFENDER 110/130 YRM REF: 265

I finally starting cleaning frame underneath had time to look at rear bed support wings. My friend would like to replace the tops, then all the holes would need to be drilled out? Seems this is where you cut off & replace. 1984 110 PU To get the correct part who is best to use, Paddock?

Thnx The 90 had a bad blinker I needed to fix one day a kid pulled out in front of the truck young driver did not notice I was not slowing down going downhill car pulls in front I was standing on the brake pedal! Evidently I did all the brake work on that truck properly everything worked but...

Has anyone used Pioneer 4x4 brake line kits? They list kit 1987-1991 I have a 1984 PU do not believe there is any difference? Have not heard back from them. There is a balance valve betwit front & rears I do not see in their drawing.

This was an Arles Blue truck it was painted over with green. I am painting with what I have from 90. Bonnet will be done next year weather is changing.

Bonnet spare tyre holder assuming there is a bolt with a tyre holder needed?

Those were Brit part

Finished product

Primer paint Parts ready for painting

I did the entire frame of my 90 has held up well, you need to use top coat on top of por-15 as a sealer. It can be used to bond fiberglass tape to holes of which I did in the foot well still there.

The welder has done many body restorations vehicles ships cars trucks as why I had to wait. The frame will be painted with POR-15 a tank paint maybe not avail in UK. Next hoping to finish stripping windscreen frame & seat box get painted. I have a cheap gun but it works, well did last time used...

Waiting for welding friend to return to finish repairs to frame this was how it was & repaired. Then the TD5 bulkhead was fitted before we cranked truck back into the shed for the winter. Now I have to find the parts & after more painting get things together.

1984 set up for attaching wing with two holes access to underneath to install a plate there I believe. & below no access underneath with one bolt hole will one bolt in the corner be adequate to hold the wing? There also is a round hole on outside assuming that should be plugged? TD-5 Seems the...

Does the accelerator shaft come out?Assuming the ears were bent over shaft? Or looks like it is pinned needs oil?

The TD-5 was still a defender type vehicle with a different motor assuming?

What years was the TD-5 ? Is there a fiche for that what I use I do not believe has those models? For that grommet or how do you do on the wiper? That said I can see why these rust out the replacement is in okay shape but without proper protective coating it would rust the same some time will...

Yes I think you are right washer jets thnx