Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. sierrafery

    Info for Bump starting a TD5 and checking injectors with a Nanocom

    You are not supposed to push the throttle once it fired up untill it didnt idle a bit on it's own and if it started once and ran no matter how never touch the throttle without engine already running cos you flood the engine, insisting to start it without knowing a corect procedure can prolonge...
  2. sierrafery

    Disco 2 Injector O rings

    "OEM" means nothing these days, it's just a marketing scam for various aftermarket parts, if you can't afford genuine LR(which are actually green) then buy branded ones like Viton, a friend of mine fitted some so called OEMs and they leaked straight away
  3. sierrafery

    Disco 2 air diff lock removal

    If you mean the method with the EGR actuator connected to the diff lock spigot on the transfer box which locks the central diff i'd ask why would you remove that if it works cos it's a good mod, all you can do is to replace it with a dedicated diff-lock linkage which is expensive... if it's...
  4. sierrafery

    Info for Bump starting a TD5 and checking injectors with a Nanocom

    was that while cranking? ...cos that's the only relevant reading... also dont try to crank it when you try to bump start it
  5. sierrafery

    Info for Bump starting a TD5 and checking injectors with a Nanocom

    Just seen this it must get above 250 rpm to start, see the battery voltage while cranking, if it drops below 10.5V it will hardly start cos it needs more to open the injectors it's in the "Outputs" menu last line... better read the user guides available here...
  6. sierrafery

    2001 td5 disco alternator problems???

    Yes it can cos once you started it and removed the jump leads the battery voltage can drop below 10V which mixes up the ECU, injectors and sensor readings, the more the voltage drops the worst the engine will run untill it stops not working how? it doesnt react at all when you plug it in or...
  7. sierrafery

    D2 TD5 engine bay fuse box

    Hi, contact THIS GUY
  8. sierrafery

    Disco 2 ac not cooling

    No it won't, the fuel cooler gets flow direcly from the bottom of the radiator, the return from the matrix goes into a T piece at the end of the cooler where it meets the outlet flow of the cooler when the thermostat in that piece is open cos when it's cold outside there is no flow through that...
  9. sierrafery

    Disco 2 ac not cooling

    I double checked the coolant flow diagram and i am convinced now that you can simply stop the flow toward the matrix from the top hose with a simple mechanical valve without affecting the engine's cooling nor the fuel cooler's function, cut the pipe in the area pointed with red and insert...
  10. sierrafery

    TD5 Map and ABS error

    Hi, if the TPS live readings are as they should in the ECM inputs(track 1= 0.5-0.8V at idle/4.5- 4.2V at full throttle and track 2 = supply - track 1 all the time) while TPS inputs are wrong in the ABS i doubt that changing the fuel map will help at all cos the problem is with the ECM or ABS...
  11. sierrafery

    Disco 2 ABS Modulator Replacement

    Only the pedal braking will work this way but without power bleeding the modulator once it was empty of fluid will affect the correct function of all the active braking modes(ABS, TC, EBD, HDC) cos air will be trapped between the OV's circuits, pump, shuttle valves and the expansion chambers cos...
  12. sierrafery

    Air compressor running after engine is off

    Yes, you can for test just the ride heights might be a bit different but if you connect it and the compressor will not run like with the original you know that's it. If nothing changes you should swap the fusebox... what ever you swap disconnect tne battery's negative lead first and reconnect it...
  13. sierrafery

    Air compressor running after engine is off

    Hi, which fuse exactly? No, at this point the first suspect is the fusebox or in the worst case the SLABS ECU unless it's a wiring issue somewhere and that coud be a nightmare.
  14. sierrafery

    Disco 2 Is it possible to buy replacement rear wheel arch?

    Usually such body parts are obsolete these days, though if you find one in stock it will be quite expensive, google out the p/n based on THIS
  15. sierrafery

    Disco 2 AC Cooling Fan

    If the gauge went above normal means it was too hot already cos it leaves the middle at 120*C and the electric fan kicks in at 110 by default, so if it ran full time means there was more than 110*C and that will kill the engine on a long run... IMO you have a cooling issue cos it's not supposed...
  16. sierrafery

    Disco 2 AC Cooling Fan

    No probs at all, others did it as well
  17. sierrafery

    Disco 2 ac not cooling

    Yes, you can't acees the matrix other way
  18. sierrafery

    Disco 2 ac not cooling

    That's why i said to undo both pipes and join them together, not hard to do, all you need is a short piece of pipe to insert between them and use the existing clips
  19. sierrafery

    Disco 2 ac not cooling

    The matrix has permannent coolant flow and the heating/cooling is managed by the servomotors which are opening/closing the flaps, when cooling is set the flaps for the heater core are supposed to be closed and all the air should go through the cooling evaporator, a real specialist should fix it...
  20. sierrafery

    accidental cure.

    the man mentioned it: I used it myself too once( THIS ) and felt some slight improvement but not more than with Liqui Moly or Wynn's.
Back
Top