Search results

Done that and all seems good think need to re-register as the new owner now

Yes I got it off a lady whose father in law had passed and she was selling his tools and it was in the garage but she couldn't find the cable

No I just bought one and need a OBD cable to test to see if it's working before I buy one

Hi all does anyone have a nanocom in the St Helens Merseyside area?

Hi all discovered the problem on the old girl, it turned out to be a seized pulley on the AC compressor. Swapped it out for a new one and all is good she running 100% better and smoother and has the excelleration back. Massive thanks to everyone for your replies it's good to have a network of...

Car runs fine on tick over and starts on the button, if I drive for 5 mins and turn it off then start up and drive again it really struggles to excellerate for about 5 - 10 seconds then goes ok but still seems sluggish under load

Ok cheers for the reply looks like I've gotta get it plugged in then

Hi my discovery 2 td5 seems to be lacking in power and struggles to excellerate, there seems to be no boost at all. I have no noises or smoke.Is there any other reason that this could be happening? Thanks

Cheers for the reply I think I may aswell just replace the AC pump, I checked it yesterday and the bearings etc are making a right old noise

Hi everyone, looking for a bit of info. Has anyone bypassed the AC pulley by fitting a shorter drive belt? And if so what belt did the use. My girl has ACE just to let you know Thanks

Ok thanks for that info thought I'd better check befor i go messing around with it

So i have replace the faulty sensor and had it plugged in again to delete historical faults, and you guessed it POW the 3 of them still sat looking at me along with their friend the hand brake light. Was wondering if i could have a problem with the SLABS?...... are these just plug and play or...

Hi guys had the old girl plugged into a nanocom at tye weekend and turns out i have a faulty sensor so had it replaced

Yep just a rubber seal fitted

Ok looks like I'm gonna have to get her plugged in to a suitable diagnostic tool, I've had the sensors out cleaned them removed the numerous shims that had been fitted, cleaned the reluctor rings to

About a month ago i had to replace 2 pipes coming off the abs module, i have bled the lines through but not using any sort of diagnostic tool.Would this have any sort of bearing on my issue

Hi thanks for replying, i have fitted a brandnew shuttle valve so I've not done the mod, ive not had it plugged in yet i need to find someone local with a nanocom

Hi everybody I have a 2003 td5, i have replaced all 4 hubs and sensors and the shuttle valve. Since this i get an intermittent 3 amigos and the red handbrake light, if i stop and restart they all dissappear apart from the abs light that goes of after about 20 yards. Can anybody give me any idea...