Search results

Possibly the hole the ball-joint goes into has been deformed so it just wrecks the new ball-joint? Or someone fitted Britpart.

Don't look at me. I have 3 of the sods blocking up my drive now. Need to sell one ...

I'd have to check RAVE next time I have the laptop running but it is less than you think. 90 nm sounds way too much. 25 nm sounds more likely. The high pressure pipes just need nipping up so they don't leak. Finger tips tight using a 17 mm spanner. Admittedly my finger tight which is fairly tight.

RAVE says always use a new bolt as it is a stretch bolt. Sone say you can reuse them a few times but I wouldn't risk it!

Strangely the original parts seemed to last a very long while. I think he was referring to the labour but yes, their parts prices take the urine. Jaguar used to have an owners club card where they gave discount for old Jaguars and did deals every so often so you stayed with them and got...

Last time I went for parts from my Landy dealer the kid pointed out the car was considerably older than he was and he generally only sees JLR cars still under warranty because the dealer prices are so high. Fair point!

Sounds plausible.

Pro Evo+ seem to specialise in JLR and are based not far from me in Abingdon. Guess that's their office and everything shipped from China? https://proevoplus.com/#about-pro-evo 24 month guarantee on all products, apparently. Tempted to pop in next time I am there and see if they're available...

Dunlops a bit pricey but Proevo+ about right. Never heard of Proevo+ before. Not sure I'd risk them over Dunlop, not even being 30% cheaper!

Terrano?

That's the guy!

Let me get the bag and see what's in it!

Value is in RAVE. I thought it was 12 thou of an inch but I might be mixing it up with something else.

Might have been @backinblack that did the guide?

Sure it is in the TDC hole? A skipped tooth would cause issues. The cam is set with a 12 thou spacer when tightening the cam stretch bolt. 10 mm is way too much.

I wouldn't touch Arnott 2. Had manufacturing issues recently. Arnott 3 are good but not worth the expense. Dunlops are best bet.

I might have a bag of them somewhere.

Works for me?

Storey Wilson does some cheap software for the early models. Later ones are canbus and use his 4Dcan software. Trying to remember what he called the earlier software. Needs a laptop and cable though. I did have it on my laptop but the laptop died and took everything with it.

There might be an access hole somewhere so you can poke an endoscope in to see the flex plate?