Search results

After doing this to the bolt i plan to just keep using the cylinder and hope for the best Any advice would be good before i put it back together with new shoes and drums

What kind of chisel do u use? I broke mine

Ah, sometimes i think too much🙂😗

When you chiseled them off how did you afterwards get the threads off??

No the the two bolts on the bottom that were supposed to be there were missing and the last one i can feel but hard to reach which is behind the pump on the left side. Also the previous owner may have damaged some parts as it had a couple of zip ties between pump/filter and do you know what the...

Hello im planning to replace wheel cylinder, do I also need to change brake pipes as well? Is the M6 x 10mm for the wheel cylinder have 7mm head size? Or does it only matter with the thread size? Mine are rusted and i both need a wrench and maybe new bolts

Hello I was trying to change fuel filter today but was having trouble reaching it, hard to see it except from an angle and i could feel with hands. I watched youtube and the guy said its 3x10mm bolts holding it, 2 were missing below it so only one holding it on top but to reach do i remove line...

I wanna be on the safe side, since mine looks a bit different First pic is on the left and second one is the right side. I assume the level plug for mine is on the right side(the one with smaller length bolt on outside appearance)?

Nice, was it difficult with the repair or mechanic do it?

Sory to hear, didnt know there was a v6 FL1. Is it petrol?

I have driven in total about 3-4 km max after draining and filling aprox 4L transmission fluid, no more i would say. Do you think this would be enough to damage gearbox? Personally im not too worried but im know so knowledgeable to these kind of areas but i like to be hopeful Thanks for advice...

I bought a big syringe with tube specialized for transmission fluid so will refill more, but is the temperature range this critical when checking the fluid level? Or can i just have the engine running just a bit for sometime and fluid be warm to touch, by touching gearbox?

It was done with engine off, and may i know what tick over means? Yes it changed normally when driving but i havent driven high speed(high way) yet because im still fixing brakes cuz all the rain so far and work. I found out the sound was coming from reat brakes… but when i checked shoes...

Will look into it, many thanks

You lost three fuelpumps with that ron/roverbox thing??! Any other ideas to pump up the horsepower? I really do like the extra power🥲🙄

True Thanks🫡

Hello, could you please tell me size or link for level plug washer and if the drain plug uses a washer too, if so what size. Thanks🫡🌞

Hello not too long ago i changed auto transmission fluid with dexron III(FL 1, 4TD 2.0 diesel 2006 automatic) and whenever i change gears while car is stationary it jerks very noticably… I didnt notice this before and i dont remember it, i wish to know if anyone knows what problems may cause...

Okay i found out the sound was coming from rear left brake…….. but since the rotor in front was too hot too touch, I always thought it was the front….. going to change rear and replace pads in front and give update. When i order new brake pads, do i get the rotor as well? Or only pads needed? I...

I am not sure but there is a loud squeaky noise when i reverse and slight sound when i drive forward, but i dont know how bad wheel bearings are supposed to sound or feel like. The car does break well however when i lifted the car in the front it does slide but i can hear it the pads touching...