Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Mike v.t.s

    air suspension height/steps ?????

    Thanks for that, imine started leaning to the driver side really bad then after driving for a while it settled down so i decided to check the settings and thats how i cocked it up, the air bags are fine only 2 years old and they are genuine dunlops no leaks i checked um, now it seems that its...
  2. Mike v.t.s

    p38 diesel 1995 keyfob

    You can get a new after market fob that WILL work from a company in manchester, i think they are called keyteck or keyguy, my mate got 1 for his and it worked. Il find the proper name for the company and the number but it did stil cost around a one'er (£100) this is a defanat ive seen it with my...
  3. Mike v.t.s

    what happend? couldnt get on here for a while???

    dont no if its the rite place to ask but what happend to the site? i aint been able to get on here for a while i kept gettin a whit screen with some writting saying theres a problem with the site and the moderators are aware of it?? did any1 else have this problem?
  4. Mike v.t.s

    air suspension height/steps ?????

    Hi all, need some advice for my rangie dse... i noticed it was leaning over a tad so i plugged it in at work and to cut a long story short i dropped a bollok:doh::doh:... i set the standard ride height to factory setting and now it just aint right, does any body have the correct height for all 4...
  5. Mike v.t.s

    boost temp sensor -43oC

    Sorry for the long wait, the tool i use belongs to work and i think its called autodiagnostic or sumert like that, i no it cost around 4 grand and talks to everything on the market, it lets me re-code becms if they are unlocked. Il message the real name of it tommorow.
  6. Mike v.t.s

    boost temp sensor -43oC

    Hi there mr wammers and yes it does seem to be hammering fuel, 10 squid is getting me around 25 miles but the tank has been low since xmas with all the bills etc etc so i havent managed to fill her up like i normally do so its a tenner everytime the fuel light comes on, i no that it isnt a...
  7. Mike v.t.s

    boost temp sensor -43oC

    Hi all, daft question... plugged my rangie in at work and everything is ok but noticed the boost temp sensor is constantly reading -43 degres c so my question is what will this be affecting and does it really need changing urgently as i hadnt noticed any differance when driving but this is the...
  8. Mike v.t.s

    I'm off.....

    Take it from me as an EX Kia of bolton (horwich) spanner chucker that its got a full warrenty and read the small print on the 7 year bull**** marketing skam that they advertise... all is not what you think.... id get the diesel version if any and if you like being sat in a "plastic" bowl then...
  9. Mike v.t.s

    LED's

    now that gives me an idea ha ha ha ha ha
  10. Mike v.t.s

    p38 2.5 diesel noisy tappets

    Just give it an oil service to start with, a noisy tappet is nothing to worry about normally, when the tappets start to rattle i normaly stick sum engine flush in the eng and run it for 10 mins befor i change the oil, if that doesnt cure it either chuck some new 1s in or get some tappet additive...
  11. Mike v.t.s

    DSE autobox oil temp

    and the cooler i fitted is alot smaller but its from a 12 cylinder (W12) new bently engine that puts out over 550 bhp so id of thort that it would do just for the time being, i have noticed that its holding gears a tad longer than normal after 15 mins driving slightly nippy etc but that could...
  12. Mike v.t.s

    Bigger turbo for p38 dse ???

    i did play with the boost pressure on my van and increased it by quite alot and didnt have any problems with it, and coverd 150,000 miles... i just wanted to check coz at the moment my rangie is a tad tempermental to say the least :D
  13. Mike v.t.s

    DSE autobox oil temp

    Erm... my gun reads degres C and degres F and im sure it was set on degres C but the kids had been playing with it :confused: But its back on c when i just checked it... how can i find out at what temp the oil should be when driving?? thanks for the reply.
  14. Mike v.t.s

    DSE autobox oil temp

    As most of you allready no ive had some mega issues with my rangie with blowing an engine, then that being faulty etc etc then the gearbox goin and the turbo giving up... now ive ****ed the g/box cooler up so i replaced it with 1 from a bently continental GT (W12 engine) from work and its...
  15. Mike v.t.s

    Bigger turbo for p38 dse ???

    how do i turn up the boost pressure?? and where is it situated? do you mean by adjusting the metal bar underneath the turbo? which way do i wind it and by how much? this could be why the turbo i fitted isnt as good as my old un ,many thanks:D:D:D:D:D:D
  16. Mike v.t.s

    where can i buy new general grabbers??

    has any 1 heard of these or even tried them???????????? eBay - The UK's Online Marketplace
  17. Mike v.t.s

    where can i buy new general grabbers??

    I looked at the new ATs but they dont look as good, i mean how can they be as good off roadin and in the white stuff just look at the tread pattern, my old AT2s was foooookin brilliant off roading and i can honestly say they didnt let me down not once, even when doing the serious off roading in...
  18. Mike v.t.s

    Bigger turbo for p38 dse ???

    Yes its still working, ive just got to set off in 1st then when i get to around 10mph i can pop it into drive, what is this conversion you speak of?? got my heart racing lol... is the zf4hp24 the petrol auto box and how or what do i have to do? many thanks.:D
  19. Mike v.t.s

    Bigger turbo for p38 dse ???

    ****... i said recon... i ment second hand...
  20. Mike v.t.s

    Bigger turbo for p38 dse ???

    i iftted a recon turbo but now im wondering if theres a bigger or more powerfull turbo i can fit to my p38 diesel with out doing any drastic mods to pipework etc etc, has any1 uprated theres and was it worth it?? i dont want **** loads extra power... id be happy with just a tad... to help the...
Back
Top