Search results

Hi and welcome! Nice looking Landy too!

There’s a set of 4 for sale in Bridgwater on fb marketplace…

Agree, £10k is too steep. It’s also someone with a family connection so I’m sure you can get it for much less. As Mick says, an MoT shouldn’t be too much of an issue to start with. And it’s got farmers wing syndrome!

The exhaust had sheared at the elbow below the turbo where it joins the manifold. It was welded back together by my indy specialist. No more rattling exhaust.

I find there’s never a right place but there’s always a really inconvenient time or place!

Hi and welcome! Sounds like a good project. Don’t forget some pictures.

Hi and welcome! Yup, we like pics of landies!

Hi and welcome! +1 for pictures!

I had mine done by my independent landy specialist. From memory, it was the new head gasket, head bolts and coolant. It was ten years ago and I’ve since sold the disco so haven’t got the exact details.

+1. No sealant needed either. The previous owner fitted mine and painted them black. But the paint is coming off as it doesn’t key to aluminium chequerplate without preparation.

My Td5 developed a leak at the back of the engine behind the rotary oil filter. The coolant had a steady slow leak with no obvious signs or overheating. It turns out the head gasket had failed with a very slight leak but the tell-tale orange coolant trail was only visible when I removed the oil...

Hi and welcome!

I took a look under the 90 today. Turns out the downpipe has failed just before the intermediate pipe 🙄. But I’ve been eyeing up a shiny stainless system… 😎😎

Can I suggest that the title is amended to something like Light bar Wiring or similar so that it comes p on a title search for posts?

Hi and welcome. +1 for the above. And watch out for seized screws in the hinges on the bulkhead.

Looking good. 😎

Did you post on FB a few days ago with the same? It looks familiar .😁 It looks much better with the white roof in my opinion. White steel wheels will look much better than alloys too. Personally, I’m not a fan of alloys on a defender.

H and welcome! Nice part of the world! We went there in 2011! 😁

I’m sure it can be done but it’s more for ease of access to welding. Just realised it’s the second row crossmember, not the rear one!🙄😂

I’ve just watched the entire video instead of the housework I should be doing!😁. The group that were laning together looked well prepared but I’d say the weather with those swollen river crossings were still too dangerous. As for the two in those buggy things, they were lucky it wasn’t a...