Search results

Hi Mystery I totally agree with you regarding sorting this out and not leaving it for the next owner (if I ever sell it!). I've pretty much done a full restoration on her but the wiring has been a struggle to be honest, I replaced the engine loom and the injector wiring but they were just...

That sounds like a good idea. I's like to get to the bottom of it tho.

Absolutely!

Hi Everyone I'm trying to sort my engine warning light. Normally they are a pain in the backside when they come on an they wont go out! In my case the warning light is not coming on. Before I bought the TD5 I know that there were some issues with the immobiliser, which I finally sorted and...

Looks genuine advert but the prices have gone mad. Imagine if someone had said a few years ago that a 1986 90 would be selling for over £6k!! Better to buy a ropey one and do it up yourself. At least that way you know the issues, even if you pay a local garage to do it for you. We all know the...

Finally finished the door card and dash refurb. Really pleased with the vinyl dye spray that I used. Door cards had all the clips replaced. A very enjoyable job. The eagle eyed out there might notice the use of wing eyebrow clips for the fascia fixings. I thought I would make the cabin more...

I took off the TD5 starter (a lot easier than I thought it was going to be) and got it on the bench. I then replaced all the all the connectors inside. Dead easy job. I had been getting an intermittent click with the starter. However it turns out that whilst the connectors were worn and probably...

IS the wormgear the same as the cable that runs from the motor through the wheelbox? If it isnt then you definitely need to replace that as its the main culprit in all of the wiper issues. Genuine landrover wiper boxes are much better as well. I would replace the relay on the bulkhead and also...

Hi Shrubby - I just fitted a Britpart one, its about £12. I've pretty much done a full restoration on my TD5 Defender so I have had to make some choices on whether to go genuine or Britpart/Bearmach purely based on price and value for money. My thinking here was that the part is really easy to...

I had the same issues with water ingress into the footwells. The fact that Landrover produced a workshop manual to reduce or repair leak is quite appropriate https://www.landroverweb.com/Pdf-files/Manuals/Land_Rover_Defender_Water_Ingress_Manual.pdf credit to western at landroverweb. After I...

Fitted a new MAF sensor, cleaned MAP sensor, took the door cards off and replaced all the wee black grommit things and cleaned then ready for a spray with light grey vinyl paint. Removed all the door locks ready for replacement when they arrive. Took the back door lock and handle mechanism off...

I've just fitted a new MAF to my defender TD5. The readings were zero previously so I figured it was finished. Fitted a new one and I get about the same readings as you. A massive difference in performance for me on low end pick up.

Sounds like the wheel box. If the gap between the cog and the lip on the wheel box is too big it will allow the cale to run through but not engage properly and so there will be a slop on the wipers. I fitted a genuine wheel box and a britpart one. The britpart one just need a very slight bend in...

Hi Graham I have just replace my Defender windscreen seal. I got some advice from a mate that is a professional windscreen fitter first. Basically I just cut away the old seal from the outside and then needed to do the same from inside and the glass came out easily enough. I then cleaned the...

Cheers - ordered!

For some bizarre reason, as part of me replacing the door lock barrels I have decided to refurbish the door cards for my Defender. Im going to clean and then vinyl dye them as close to the colour as possible. When I was messing about last night I decided to take off the dash (for the 5th time!)...

Thanks for the help Mystery. I gave up looking for a relay that was the same as the Glow Plug Relay that i had ordered. I looked everywhere. In the end I stuck a relay into the plug tht was empty under the drivers side seat. Ran the diagnostic check and the fault code came off. I have a pscan...

As Flossie said. Replace both at the same time, as taking the dash off twice when the other onegoes will be annoying. Don't fiddle with the grub screw on the spindle, just cut them off as you are replacing them as part of the wiper box. I had to fit a Britpart one and a genuine one as my local...

Thanks Scooby. Ill check this when I go on the Glow Plug Relay hunt later!

Ok - so I've established that the Glow Plug Relay insnt under the RH seat as its supposed to be, and so now I will just have to trace the wires back from the glow plugs (Ive checked some previous posts on here and someone had exactly the same problem but wasn't resolved. My 1999MY doesn't have...