Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. lorri789

    momentery Power loss/hunting

    I found that the tacho prob was just some broken wire. I've checked for vacuum. it appears to be firing on all cylinders too.
  2. lorri789

    momentery Power loss/hunting

    The tacho
  3. lorri789

    momentery Power loss/hunting

    Hi all, 1992 3.9 Auto council spec I've been whizzing around this morning destroying the planet and loving the RR. On the way back this morning there seemed to be a little power loss every second or so for the last 2 miles. It was quite consistent. I drove approx 8 miles this morning. I've just...
  4. lorri789

    Re-connecting the Self Leveller weirdness

    Done. Thanks again Pete.
  5. lorri789

    Re-connecting the Self Leveller weirdness

    Lol.....okay I'll try that. I'm a dummy.
  6. lorri789

    Re-connecting the Self Leveller weirdness

    Hi Guys. I'm piecing my suspension back together after bush changes and I've found a little niggle. I can't get the self levelling unit back onto the ball joint. I've taken off the anti roll bar and jacked the back right up, but I can't seem to get it up enough as the wheels just lift off the...
  7. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    I got garage to boof out the old joint and press the noo one in. Dude said he hadn't had one that tough before. 10 quid well spent.
  8. lorri789

    The Big Debate - Britpart or S**tpart?

    I just bought some OEM Britpart stuff and it's very good compared to the "found in a skip" Britpart bits.
  9. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    I usually use the two hammer trick on joints, but I have to admit this one was a pig unless you knew where to whack it.
  10. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    Thanks JAmes. One massive whack and it was out. ;)
  11. lorri789

    Auto Gearbox Oil Cooler

    My mate used a generic thing bought from some rally car supply place with a couple of extra pipe bits. Works just the thing. Do we really need it?
  12. lorri789

    beauty

    That is sweet. Really sweet.
  13. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    Okay, thank you.
  14. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    Thanks James. Are you talking about the underneath bit, where the taper ends and the threads begin?
  15. lorri789

    A-frame ball joint stuck in axle carrier. Halp!

    Halp I'm replacing the dreaded ball joint on the a-frame and it has all gone fine so far, except I can't remove the balljoint and fulcrum from the axle. The tapered bit just wont budge!! I tried a lump hammer and drift; jacked up vehicle and let it fall on a lorry jack and it still won't...
  16. lorri789

    Identify a panel piece please

    Great thanks. I assumed it was the bottom of the box, but I can get the single piece from YRM. Thanks again Kev :)
  17. lorri789

    Identify a panel piece please

    Hi folks, Could someone please identify the panel piece marked in red in the picture please. it attaches on to the body mount. Thanks as always.
  18. lorri789

    New to Landyzone

    Welcome :)
  19. lorri789

    introducin myself

    Welcome along..
  20. lorri789

    Mingjun Motors M3 S1 - Chinese Land Rover Freelander knock-off

    Of the top twenty selling cars in China, only one is Chinese. VW and Chevy hold most of the top spots because the Chinese wouldn't drive Chinese stuff
Back
Top