Search results

For the starter inhibit in gears other than Park and Neutral, the V6 uses a white wire from the auto box to the Immob ECU. Now, the Immob ECU prevents cranking when the ignition key chip is incorrect too and also requires a key chip match to the Immob ECU and the Engine ECU. Have you retained...

TD4 Sport running well. But when monitored it still 'max's' out on Inlet Manifold Pressure. Using PScan logging function - I have charted the RPM against road speed, Inlet Manifold Pressure (Actual) and Inlet Manifold Pressure (Required). It appears that the boost is being given without being...

Also, some tow bars have this plate welded on so not an additional item.

Just remains to add "Solved" in the thread title to help others. 😇

Surprised the guards rub. See if you can tweak the fittings to give clearance when you refit. Mine have space behind but that is a pre facelift.

Great news. Worth the greatest award of a Landy Cookie. They get handed out often but no one has actually seen one 😀 Pleased you are back on the road again. Just keep trying, there is always a way......

Only work with sidelights and I think ignition on too.

Check inlet manifold and EGR for being clogged too. I had one EGR that caused a dead spot as pulling away. Blanking the vacuum to it removed the problem.

Share the error. Many others will have already and many will go on to make same mistake !!

Wheel arch liner out and dremel the nuts off the inside?? As above, keep heat down for sake of wing and guard.

Don't need headlights out to polish them ! Overkill. KV is talking about the guards.

Make sure plunger is free and springy before fitting. Insert switch so that the plunger goes through and sits on pedal stop. When seated flat and happy with plunger twist body to lock.

Ah. You didnt mention the guards !! Looks like nuts on rear ??

Hairdryer time and lens polish. Bulbs out, hairdryer in. Not difficult job. Don't handle the bulb glass faces.

Indeed. Worth getting fault codes read. Could be many things. Did AA read codes or guess ?

All Freelander 1 spares available (most of the time!) Also a good TD4 engine complete (still in vehicle) and a TD4 MOT failure to clear. Good engine, box (manual) and IRD. Rusted rear subframe. Please ask, got most stuff on the shelf. Can deliver large items within 30 miles of South Molton...

Sounds like cable moving the window up.and down has snapped and the CCU now doesn't know where the window glass is and so is bleeping. It might push down a bit by hand to enable you to shut the door. Pop inside door cover off, 4 screws and some pull off clips and then you will see what has...

Sounds like another loose connection. Check the engine bay fuse box where battery lead enters and the large fuse fixing screws.

Like I say, possible and a bit like delivering a calf through a letter box !!

BTW, I did a coolant pump without touching any mounts. Access through track rod slot in wheel arch. Fiddly but possible.