Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. roger01

    P38 lowers when started

    Hi, the car is at normal ride height when you stop/switch off, as soon as you restart you get the all lights on pre check as normal then solid light for normal height but the disembark is flashing as if you had pressed to lower and the car starts to lower, if you go into drive/reverse or touch...
  2. roger01

    P38 lowers when started

    Hi all. had the 2.5 DHSE for 5/6 years and apart from replacing the rear bags the EAS has been ok in fact the whole vehicle has never faltered in the time I've had it, you can park up for several days and the suspension stays up but of late when you get in and start up the disembark level light...
  3. roger01

    P38A Weird key fob problem

    The strip looks ok but never thought about 2 series batteries and 1 getting kicked out if the + contact strip is tricky, should have thought of that cos the remote for the tracker alarm on my Stag has 3 batts in series and that used to be a right pain so for the past umpteen years I always...
  4. roger01

    P38A Weird key fob problem

    Hi wammers, it's a 2001
  5. roger01

    P38A Weird key fob problem

    Hi mozz, the numbers on label on the PCB of the non functioning fob is the 101 followed by the larger digits 002937 as per pic. the transmit LED on the fob lights when the buttons are pressed, it performs just like a fob out of sinc but for some reason it wont sinc, it has done in the past at...
  6. roger01

    P38A Weird key fob problem

    Hi mozz, thanks for your reply, the dash display just shows as normal (P in park, total mileage and trip miles) when the car is unlocked with fob 2 she'll start and run with either keys it's just fob 1 wont operate the locking/unlocking, as I said I have used both keys on a few months rotation...
  7. roger01

    P38A Weird key fob problem

    Hi all, I know there are various threads on this subject but can't remember comming across one like this, the button rubber in my P38 No1 fob did a runner, stuck it in the drawer and used the other (No2) fob, got/replaced the rubber, fob wont work, tried re-sinc still no go, 2 new batts still no...
  8. roger01

    EAS software

    Forgot to mention when I fist met him shorted the relay etc and the compressor works and produces air, I have a rebuilt spare I was going to loan him if his had been duff.
  9. roger01

    EAS software

    Thanks for the replies guys, the video link was interesting he did the hook up in a slightly different order so will try that way tomorrow, I have XP pro and Win7 on 2 laptops and have tried them both, I referred to the guy as a mate (well suppose were getting there now) but only really met him...
  10. roger01

    EAS software

    Has anyone used the RSW freeware for the EAS diagnostics, my RR is ok but a friends sank to its bum a couple of days ago, there was an OBD plug/cable came with the car when he bought it a few months ago it's a serial with a serial to usb cable plugged on. Downloaded the RSW freeware and the lpt...
  11. roger01

    What do my fault codes mean?

    What with Christmas and a bit of working away only just got chance to pull the dash out, Wammers and Datatek your diagnosis was spot on, one of the srs lights was up the chute, all replaced and now no fault lights, bit strange, I sorta got used to it being there, thanks again for the input
  12. roger01

    What do my fault codes mean?

    Thanks for the replies guys, yes already checked the usual suspects (pre-tensioner plugs in door posts and the under seat plugs, had that prob on a freelander a while ago) they all seemed fine but cleaned/re-connected them anyway, as per previous post the dash has to come out anyhow to replace...
  13. roger01

    What do my fault codes mean?

    Hi thanks for the reply, I will remove the inst cluster and have a look, it needs to come out anyway because a couple of the inst illumination lamps have gone, should have mentioned in the first post, the srs light comes on and the message reads air bag fault, press the btm left stalk button and...
  14. roger01

    What do my fault codes mean?

    Hi, a bit new to the forum being trying to find a link for fault codes and this thread seems to be the closest, got a P38 DHSE the SRS light has come on read the code with an Omnitec it shows DTC read 1 - B1041 - open circuit fault redundant - fault warning lamp, been trying to find out what...
  15. roger01

    AC DIY recharge

    yes in a commercial system the oil does sit in the compressor but in auto ac it is in with the gas, I have had numerous new vehicles from several different manufacturers and since my first taste of aircon in 1983 I have had it in every vehicle since and generally at the 3 years + mark the...
  16. roger01

    AC DIY recharge

    The gas in an Ac system also contains oil, this is lubrication for the compressor under normal operation, hence if the gas is low the oil/lubrication is low. All ac systems deplete with use, (average use maybe 6 to 8% per year) as the gas level drops the cooling effect drops off, once the gas...
  17. roger01

    AC DIY recharge

    The Ac refill cans are £34 for the first one, you get £10 back on the empty so the next refill can costs £24, you also need the adapter ( apx £15), this is a pressure gauge that screws on to the can (can be re-used), it has a the hose attached, the end of which clips on to the fill nipple on the...
  18. roger01

    Air con component testing

    It's more than likely low gas pressure, the aircon gas also contains oil to keep the pump lubricated so once the gas level/pressure drops below a certain level a sensor in the line shuts the system down, if you want to check the pump runs ok you can pull out the relay (in the engine bay fuse...
  19. roger01

    3 door sport leather

    Hi, finally had the colour matched at Liquid Leather, apparently there is a light and a dark Teal, the one LR used for the F1 seat centre panels is dark Teal, this is a colour LR borrowed from Jaguar which they used only on some export Jag models for the American market, so if any future readers...
  20. roger01

    3 door sport leather

    Thanks td4van, you must have posted while I was typing my replay to Irishrover, that has verified what i have been told, I was a little sceptical because it took several attempts to get the info out of the dealer. best regards
Back
Top