Search results

It’s the power steering drive belt that keeps going slack over a period of time. It’s new belt which is correct width etc. after a week or so I have to readjust the pulley below to get more tension.

Any advise on keeping it tight more than a week??

Yes. Sorry forgot to put that

Hi all again.. a quick one about my power steering.. I seem to constantly have to readjust the pulley to tighten it as over a few weeks it slackens.. is there anything I can do to stop this.. it’s fine.. just annoying. Thanks in advance

Took the bulb out of the dash.. cured! Will get a earth leakage cable

Turn signal on dash is really faint even if the knob is turned up or down

Right I’ve changed the relay and the hazard switch.. both indicators and hazard are working but when indicating in either direction the other indicator ‘ghosts’ the other side by dimly blinking.. do I need an earth leakage cable? Thanks

it’s not an adjustable relay.. I’ve got one coming today. 1991.. 200tdi

Hi. I’ve changed the fuse for the hazards.. they are working now.. indicators still not.. no lights on dash either. Thanks

Hi all. I’m hoping someone can help.. I have installed new LED lights and everything was fine until I installed the side marker indicators. Now all indicators and hazards have stopped working including the dash light and clicker. All fuses are fine, hazard switch looks ok no obvious burn out...

Hi. Following on from the above. Just been having more of a look and there is a lot of play in the steering column down to the power steering pump.. see picture. Is this normal? A good half turn each way by hand can be achieved. Thanks

How much play should there be in the lower ball joint? If it’s not that are there any other obvious things I should look for with the steering? Thanks again

Can’t wait! 🤣

Mega! Thanks chaps

It seems to be excessive play from the joint with the split pin

Hi, I have a question about the steering box drop arm. I have a 90 with a terrafirma lift kit and 285 BFG’s. The steering has a fair bit of play before engaging the steering. Had a look under the front while the steering was turned left and right and the steering box drop arm had quite a bit of...

13mm by 725mm

So belt that is on is Dayco, I had a continental as a spare which seems slightly wider and shorter.. although measurement on the belt is the same. Gave the pulley a wobble and seems fine, only thing I’d say is when I turn the pulley in one direction it’s smooth and in the other direction it...

Thanks for all the advice everyone! I’ll give it a go and let you know.

I’ll take the belt off and have a wobble of the pulley. Yes fluid is fresh and full. So is that a no or yes for brake cleaner?