Search results

Forces of hundreds of tons can be imposed on tow points. Incorrect use of stripe over the correct recovery ropes will Impose instant high loads and have been known to rip off mounts and all sorts. A rope will spread the weight over a longer period as it has some give and this can and will aid...

Jate rings the ones you got which are typically £12-15 each and are not the tie down loops nor the inferior J A T E rings that the military sometimes use which are again for lashing down by those that go through the chassis with a bridal is usually more than acceptable for general recovery inc...

As before all welcome at the pub meet. We are sorting out comps with www.AnglianLRC.co.uk

Thats the correct type anyway. The simple one way valves are not ideal as the tank cannot breath. I don't think it will do much on an EFI anyhow but it deffo pressurised the tank and threw loads of extra fuel in when warm very noticeable at tick over after a run or warm day. I also had issues...

John you have a winch PTO with a forward facing output for the winch propshaft. I believe the OP wants a rearward facing with a std propshaft flange opposed to forward facing.

How did you get on with the one way valve?? I've just removed one from a CCV tank as it totally screwed with the mixture expecially at idle on a hot day with fuel expansion plus the hot fuel returning from the carbs warm. I had to junk it in favor of a roll over ball valve.

Don B who are you trialling with??

gearbox £300

Wheel steps now for sale

101 LT95 short input gear and bellhousing gearbox inc gear leaver £300 Dunstable Beds

For Sale disco 1 3.9 manual has LPG fitted but tanks removed for sill repair needs a core plug by the engine mount Runs and drives sills are bad and been cut out ready to box tidy interior for age £450 I got this to break and its too tidy not pull apart Dunstable Beds

Salisbury 110 axle case inc diff with detroit locker fitted 4.7:1 ratio or remove and fit your own defender axle. £350

£300 its yours. it still needs a bearing but they can be got for £40 i believe.

Lol wheel steps for 101 and 2b

How much are you willing to pay?? Needs a bearing I suspect, but otherwise all there inc lever which is rare? I have something I have seen and needs a few ££ depends if I can get all the money together at the same time if so I may well consider selling it. Dangerous eBay!

Haha! Umm Postage but depends what you want if anything plus cash. In always open to deals. James what would buy your 4 pin? Is it 15mm or 18mm cross pins? Well........ I got some good friends up near Inverness and some crazy family near Glasgow but we never talk about the crazy family!

Vil give me a price and or anything you want in return swaps etc. Plenty of Landy bits. Depending on where you are could pop up one evening and strip wouldn't take much longer than 30mins/40mins with tools to hand. Will need to be drained of oil before hand. I've been all over the country...

Vil I may be interested in the ends if they're disk

James I've checked but no pinion. Sorry it's somewhere kicking about but I can't see it