Search results

Kit didnt come with a bush so i didnt change it. Ive tried every way to bleed it. Thinking an internal seal on the master seeing as i had black fluid.

Didnt put it on the shaft but it is on the right way.

ive had the car just over a year and was told the clutch had been changed which turned out to be true as it was hardly worn when i removed it. What they didnt change was the release bearing and it was getting louder,obviously going to do the whole lot while im there. Thinking back,the gears...

Fot everything back together and bked it again with the easybleed. I can drive it but its not pretty and i cant get reverse unless i turn the engine off. Looks like ill be orfering a mastet cylinder.

I used a clutch alignment tool,it looks off because its the shaft isnt actually located.

Try now.

Quick vid of the fork. https://www.youtube.com/watch?v=oNx41Ma_iyk&feature=youtu.be

Bought and an easybleed kit and managed to get it in all gears but reverse but i still had to crunch it in. Tried another two times and stull no joy. Slid the gearbox back enough to look i side and everything was at it should be.Although it does seem pretty loose which is why its making so...

Yeah its a heavy duty fork.

Got the new slave cylinder in and its definitely better as i can get it in 3rd,4th and 5th but its not smooth. I've reverse bled it and no joy,I don't know if its my inexperience or something else is wrong.There is be more of a rattle than there was before and its squeeking when the fork is...

I cant get the thing bled properly,im going to halfrauds and see if they sell anything i can use to reverse bleed it. Failing that im going to buy a new slave as its pretty cheap.

D1,it says it next to the the thread title :) I just had a go ay bleeding it and managed to get first,just waiting for my mate to come round so we can do it properly.

My mate pressed the clutch pedal like a knob and the slave cylinder lost fluid. Ive tried bleeding it but it wont go in gear,the pedal doesnt seem as hard to press as it did before. Ive removed the slave and checked the push rod is on the fork,tried bleeding it again but no luck. Also when i...

Cheaper than £30? I found a local guy that sold the tube per meter and all the fittings for aquariums and it only saved me a few quid.

Land Rover Discovery Wading Kit GREEN 200 300 TDi Engine Gearbox's Axles | eBay

I have a winch bumper and a steering guard on rhe front and nothing on the back,might get a winch in the future. Ill be getting 2" dampers and springs but the medium duty say it for an extra 500kg weight on the back but i wont have that much weight or anywhere near it. Should i fit medium...

I do have fluid for the secondary circuit,its full.

All fair points but it doesn't help me understand why i have zero brakes.

It only lost a little fluid,even if the front circuit lost all its fluid the rear should still work.

Coming towards a roundabout down a bridge and my brakes failed,foot the the floor. Got it home and the front part of the reservoir is empty,i had a small leak on the front ns caliper which i was planning on doing at weekend but it was a very slow leak which is why i left it. The front part...