Search results

Hi I took exhaust and inlet off compressor in site and started her up ,then as soon as I pressed for a raise the car fault sound beeped and lights on suspension went out again and suspension fault flashed up , that's with both pipes off compressor in situe and that's the new compressor too just...

Hi all so it came back again the only time it works is when I remove this pipe is this the exhaust line ? If not why would it only work when I remove this ? Thanks all

So here's what we have Suspension shutting off Then fitted new compressor worked for 5 mins Back to suspension fault I removed the pipe in photo from compressor and she fires up ,not so good lift on front end but that maybe the mid block so I'll deal with that later but after removing pipe in...

Thanks , took the piece out like in my hand and it makes a racket and shut off again , I took the other pipe next to it off and seemed to play the game and fired up ? The pipe in pic is this an exhaust too or where does that go to as seemed to start pumping when I took that one off ?

It's just me think I've posted in two places maybe sorry , I have a new compressor on car this parts off the old one but still seeing same fault , is there anywhere I can get a detailed diagram of the Hitachi compressor, and where does the pipe connected to the exhaust travel too is it to a tank...

Hi this is the piece of my Landrover original compressor is this the silencer ? I put this piece safe for some reason ,and would it benefit from another hole being drilled into this ? Or shall I try putting this onto new compressor and see if solved ?

Hi all so I had problem with air suspension c1a13 pressure doesn't decrease when venting gallery , and c1a70 left rear sensor supply , I installed new compressor, bracket ,relay,and new height sensor back left , all done all was.fine for an hour and bam same again ,could.it be i just need.to...

If you re calibrate height sensors to correct height will that or can that have a connection in why is throwing up the cannot vent c1a13 fault code too , so in other words if ive replaced compressor and dodgy sensor but the same faults still.showing will recalibration get rid ? As tried clearing...

Hi all uh oh the susoension faults is showing again now replaced back left sensor and compressor compressor fault went rear sensor fault went ,bit showing again today ,pictures attached of diagnostics what else could possibly be causing this anyone know ? What should I try next ,considering it...

Wanted to thank all of you ! 😊 Bought new Hitachi pump bracket bolts case , fitted and bye bye fault ! Then with the rear height sensor was about to change and seen the green wire corroded and snapped off , picked away at plastic as didn't and can't wait for new one soldered new into fresh clean...

Thanks for that will order in morning then definitely,the compressor looks ok the brackets the bad part but who knows what inside is like so will do thanks for all advice too we appreciate it a lot !🙂

Bad then ?

Hi I'm in speke Liverpool L24, I could do with wiring diagrams if it's no trouble that would be excellent 👌 amazing thanks ,I've got the compressor case off and the brackets so corroded it's split piece missing too video attached and photo of details on compressor all that's on it if you know...

Hi I have these codes does anyone know what they mean please is the supply to sensors broken ,c1a70 pressure does not decrease when venting gallery and c1a70 rear left height sensor supply ,thanks all 🙂👍

Hi does anyone know what my ride height parameters are for my discovery 4 sdv6 GS 2011 please settings it should be set to and have found a wicked tool on eBay that does all suspension settings and adjustments and lots more for £70.

Hi does this software work to calibrate a D4 after ride height sensor change ,where can I download it and what lead do I need to use please 😭 thanks 👍

Would that work on a D4 2011 sdv6 GS ,I need to replace them if I disconnect negative and change them will it work ? And what software do.i need if they need recalibration is any downlo-adable,thanks 👍

Hi no definitely a front block I triple checked and part numbers were same haha but I was considering ordering another for back but won't now thanks , yes I think we found the problem so not sure where I go from here any way of finding out which height sensor it is ? Should I clean all...

@gstuart hi do you have any input on my latest findings please people say you may be able to help ,thanks 👍