Search results

ok well i have access to stuff needed to measure the bores. do the pistons need to come out still. there is a lip at the top of the bore but its very small.

ok so the head is off, found that aleast 5 out of 8valves wern't seating right so got some lapping to do lol very sooty aswell. mate of mine tells me that there is also to much movement in my pistons typical as i didn't order the bloody rings. lastly the bores are glazed again. i have turned the...

i've got a rrc rear prop on my 300tdi came off a g reg rrc. fits without any problems. just remeber when ordering uj's to order 200 uj's for the rear as there is a size difference between 200/300

Doing the same to mine this week aswell as replacing an inlet valve

the tensioner has a bearing could be that that about to give up if it is replace it asap as that belt as you know drives the water pump. mine had to have a new engine when my mate owned it due to the belt coming off

kinda only on mine you can hear it through the exhaust whilst driving which you shouldn't plus its making a right racket with it being straight through system lol

induction roar ok when you fit a k&n filter to a petrol engine you get the sucking sound aswell as a growl underload, well on mine it sounds as thou the inlet valve is open when the exhaust valve is open, so you can hear the exhaust note through the intake, but also you can hear the inlet note...

did mine not long ago. got a mate to help with holding the arch so i could mark where to cut. as for the rear doors alittle more time taken and measure twice and tou will be fine. i used the line that runs down the middle off the car as my reference point so the top of the arch meets that line...

taking my head off this week as it has a mis and is sending pressure up the inlet tracked. all stuff here including new vavles. I've done everything else that you are thinking of doing. the only reason i can think of to take the head off would be if yours still has the egr fitted,would be to...

turned me fuel pump down on sunday, and accordig to fuel after inputting everything mine disco managed 26.1mpg

give 300tdistu a shout on here makes them to order

we are the same 33" tyres with 2" lift and light bar and clear most barriers. have to stick my hand through the sun roof to hold the cb whip down but thats it

yes pal stu made the bumper for me. really nicely done and will be buying another when funds aren't si tight. the guy who bought it today said it was well worth the trip from sheffield to lytham

lucky you lol. no snow here. ok scratch that it's drizzling snow. was going to adjust my fuel pump. its the ve pump not edc. Mine seems to have very little eletrics not sure why lol

bit better than my 15mpg and yes thats diesel

ts stainless thats why mine was mild steel

would have except my back box was rotten

slight throttle response more clattery diesel sound lol

this one on mine PM011 | Discovery 300TDI Sports Exhaust

got paddocks version on mine camer back box aswell bigger bore think it was £34+vat and delvery