Search results

a bit fiddly, ended up using steel mig wire but its confirmed, there is definately power going to the RF receiver (12.01v)

wifes sews, lol, im off to give it a go

not sure how i can test if current going to the unit. very small holes to see if it is getting current with my meter....... i only have a meter with the pole type testers. reluctant to cut the wire itself, ill try a paper clip if i can find one lol

Thanks Sierrafery, just ordered one, ill keep my fingers crossed its this and not the BCU module. Just got Rave too. Thanks for heads up. 1st thing that went wrong was the horns going nuts at 3am, i disconnected those on advice from landrover mechanic. Then the Ace blew a leak a fortnight...

my thinking too. There are no readings with a multimeter other than 0.03 ohms which is the reading i get if i dont connect to anything. Would have thought i would get some kind of reading. There is a white nylon fixing/hole that could be used to mount this unit but as i say its nylon? does...

got the rf receiver out no bother. couple of things though, the roof lining may be soaking but not to front of sun roof, only to back, there are no signs of water to the front where the rf receiver was mounted. 2nd thing, the receiver was not screwed or bolted to roof, which is what i...

I do beleive you and am extremely thankful for your advice. I do all my own repairs on every car i have had since 1987 but electrics drive me nuts. This particular car seems to me to have more problems than most and having the car for about 10 or so weeks, costing £2500 and only having it on the...

me too. The nanocom has a specific menu for BCU so its strange that its telling me there is no communication with the ECU? my key was the first to go, the battery was changed but would not work with car, need to re-sync with BCU which is why i bought the nanocom unit. But if its saying it cant...

EKA code from LR not recognised, get single beep at end of procedure, tried null code 1515 with no luck. tried all methods i can find on internet but no joy. nanocom cant communicate with the ECU and says its immobilised. my question is, if i buy the same ECU with same model number, can i just...

So got it working, tried a few things, rubber hose and 2 jubilee clips, then a 10mm hose clip with chemical metal, then i cut the pipe with a mini hacksaw and put on a plumbers 10mm compression joint.......... job done and no leak, Great...

thanks, topped up the fluid and it shot through, looked down below to see it just pouring out, as i was in a field with limited tools at hand i broke away the inner wing plastic sheild to get at where clearly the leak was (ill fix the plasitcs later), loaded up the resevoir again so i could see...

did you do the conversion, i would be interested in how much it cost to do

Checked levels last night before wife taking car to horse show, useual levels all fine, had car about 3 weeks, only problem was horn on at 3 am, read lots and horns now disconnected. I noticed last night that the ace bottle had one side (furthest from front of car) below the minimum. No warning...