Search results

Hope you can understand this. The U/B goes up to plug First pic Then to the plug on Left hand side second pic. but comes out other side of plug as U. and back down to Passenger wing . other end of U on plug is just loose so might go up to dash ? The U/W from Passenger wing goes to same plug...

These are wires that lead to Front lights, first pic Drivers side, second Passenger side. should I just run these to headlight bulbs ? I know some on Drivers side are for Indicators , horn ect.

Yes I did think that the Green/ Black had something to do with fuel sender, ambulance did have twin tanks. Went for the standard crystal clear halogen lights in the end to save all the hassle with mot ect, ordered some should be here Wednesday. The military headlights I had were all rusted...

Finally got wings fitted today, few bolts still to put in but they look ok ish. might just be the way I am looking at it but not sure if bonnet is going to close properly on the big air filter housing, Joined the 5 wires that go through chassis and out at rear, there was another Green /Black...

Will decide on lights later, these are wires from wings, thought there would have been some Blue/ Whites there . Indicator and side lights are Green / Black and Red / Black. 3 wires going to headlight faded will give them a clean to see what color they are.

yes watching those, what do you think about the led lights ?

Thanks Mate. just realised that the price is for 1, sure I seen similar price for a pair, which ones did you get ?

Thats it Mate Thanks, here's me thinking it was gonna be a hard and expensive part to find, my local landy shop should be able to order one for me.

Yes I have it somewhere got wings just about ready to fit new bowls, need 1 of these in pic if anyone has one lying about , cant find a part number for it yet but will keep looking.

Just on getting my wings ready to fit, Need new headlight bowels, can get them in a kit. LAND ROVER, Range Rover Classic, Head light Lamp Bowl Set, BA 051 | eBay Anyone tried these lights, ? wondering if they will fit straight in to the bowls, Black headlamp Land Rover series 1 2 3 headlight...

Sorry I haven't replied for a while, still under the weather. Thanks for diagram above as always very helpful. Not a lot I can do now until I get wings fitted, have ordered bolts ect . Was hoping to save at least the bowels but think they are to far gone, will need to order new with headlights...

Greta job there, Those gas struts are great . Might have a go at the Indicator stalk next, think I know which wires they are . did you just run yours up the side or id there somwhere to hide them going up to plug ? W

Well fitted new sender and now working, BUT still not sure if working properly. Once again fired it up and let it run thought it was going to settle down once it got to half way, but after a good 20 mins it was still slowley rising up to the red. now remember this is only Idling as not driving...

Wired everything back up, certain its right this time will take pics later. let it run a good 20 mins fuel gauge works but temp gauge did not move, no reading at all on sender when I tried again with multimeter , popped in and got new one, readings are very similar to yours so gonna try and get...

Probably didnt measure mine properly, should have took it off and done it in boiling water ect. Going to try and have another go today at wiring, and flushing matrix out, then see whats what.

Thanks will try and have a go tomorrow. I just got the one from toolstation, Think the thermostat opes around 82 or am I wrong, anyway what readings should I be expecting after idling for a while, should it get to a certain heat then stay there ? whats to hot ?

Yes sorry

Thanks does the Blue Feed to B go to one of the ignition points on barrel .? my blue feed comes from fuse box. Where the hell am I going wrong on gauge wires ?

The one from series 3 was screwed to speedo, but the one off the 2a Ambulance was screwed on to bulkhead . So Do gauges go to I terminal and B goes to battery supply on ignition ? just a matter of which order from my birds nest. Called in...

went to get correct sensor 560794 today but turns out the part number 52770 I have are both the same part. Going to get one of these Draper Infrared Thermometer | Toolstation whats the best way to check with it. my trouble is I dont know what to look for , will have to find a guide on how to...