Search results

Only got the one my missus took My temperature with the other day :) which was 39.4, she recons it was way to high, but never mind its gone back to normal now. gonna sneak up tonight and see if I have one of those voltage stabilisers, if not will order one. Found these, I also have spare gauge...

No not been up yet can I just us thermometer to do that ?

There is one of these on the old ambulance, 148876A - VOLTAGE STABILISER 10V NEG. EARTH JAG JENSEN LAND ROVER LOTUS MG OEM | eBay is that what you mean ? can try it if I can wire it up the right way. gonna flush the heater matrix out too, as quite a few people say it could be an Air Lock in...

Will have a go when I can get up again. mine has a tap on hoses that run in to matrix. only problem I will have is I dont have running water on tap, jus 5 gallon drums.

Will try my local landy shop tomorrow, they might have one in stock, still not right yet will have to get the missis to call in for it. :(

Will try the 560794 it is on here too Cylinder Head - 2.25 Litre Petrol - Find Land Rover parts at LR Workshop cant remember why i went for the 52770 now. so do you think changing sender will / should solve the problem ?

like I mentioned before the sender was Nightmare to find where it went on engine, once the bolt was out had to get this to fit a sender as would not fit in the threads in block.

Been hit by some kind of bug today, hoping it goes away, takes a lot to put me down but this thing has got me floored, cant stop bloody shaking, every part of my body aching. Managed to have a quick go at testing sender this morning, not sure if this will make any sense or not but when Cold it...

If I wire them to where they were before the water sender just slowly goes straight up to top. Will check sender today. It just does not seem to be pumping water round engine for some reason, Rad is very hot top and bottom. This is the temp sensor I have

Not sure how much of a problem this is yet. 2.25 Petrol. not on the road yet in the process of rebuild. Dont think there is any water coming out of top hose into engine, or bottom for that matter, first thing I done was pulled the thermostat out and done the check in boiling water and it opes...

Gonna check this in morning when engine cold then check again when heated up. sender is brand new but knowing my luck probably got a knackered one. Something else is bugging me though. with all this starting engine up every now and again I now think something is up with water running through...

Thanks just popped down home for cuppa, this bloody thing is really getting to me now. I just have this cheap multi meter Rolson Digital Multimeter | Halfords UK will this do , what do I set it on ? Thanks

How do I do that ?

Think I have wire's correct now. wter on left. On my pic fuel gauge is on right and Fuel gauge is working but Temp is going straight up to Red after few minutes with engine running. No water loss or any signs of over heating. Earth's seem to be ok

Speedo unit is what was already there from series 2 . as was Choke cable. I have replaced cable as it was ready to fit to carb, but it did not have a switch or bracket on it as in diagram.

Could only find one of these for weber, it is far ti long so when I find out how it fits in to carb hoping I can just trim some off.

Think I know what you mean now, I have a couple of those otter things which I kept off old engines, do I really need it ? Pic of how I have gauges wired, they just please themselves if they go up or down or not, not sure what I have done wrong, got about 15 litres in tank but the gauge...

Yes see it I do have a couple of decent spares that I can fit. Still cant find the choke thermostat to run the white /blue to Went to local shop today and they only have one of these in, 40A took pic to show you first if it is no good will just order one of the others you linked. Still not...

Thanks Again. Have put W/Y to oil switch on filter housing, and white with white cold start to terminal 2. not sure where the choke thermostat is on mine for the white/blue, dont know what it looks like. will deal with the blue / white when I start lights ect. The oil pressure and oil...

Thanks for pics, looks great makes embarased to show pics of mine now after seeing yours :) OK Will order one , my local landy shop may have one in will try them first. Have not got round to stalk yet still trying to finish these last few wires in dash. Think ive got the water temp sender sorted...