Search results

Hi the pipes only reach the holes they should go in and did the solenoids one by one, it all seemed to work okayish until I did the right thing and refurbished it LOL it used to go down slowly but now its overnight

okay im going crazy now ive got rave but cant find brakes section or electronics section!! I know I know im stupid but where are they

Hi cheers chaps I'll go bury my head in the rave manual👍

Hi Kermit thanks, that clears that up as thats what mine looks like, do you know what pins on the ECU relate to the ABS and which corner, I could then at least bell them out and eliminate at least one more possibility

Hi I thank you all again, if new ABS sensors can be duff how do you test them before you fit them? Can we clarify where the traction ECU is, its a 2001 model and i thought it was behind the glove box and made by Wabco, I dont know why the SRS was mentioned as I know it doesnt affect the issues...

Thanks all, the front 2 sensors are new, the cages fitted correctly and sensors pushed down as far as possible, plug in readers show no abs faults, snap on and auto logic, no access to nanocom that everyone seems to get excited by, maybe I need to check rear and abs rings but readers are saying...

Hi Thanks for your reply, yes I checked the connection block, nice and clean, gently pulled the wires to check nothing loose or obviously snapped, I think it was 4 or 5 pumps between pump runs, where is the traction control ECU located, I thought the wabco one behind the glove box was the abs...

hi thank you for your reply, is that the main ecu next to the battery or the one behind the glove box, ive tried my mates ecu from behind the glove box with no difference cheers Maxderby

Hi All my 2001 Diesel 2.5 P38 has the Abs and Traction control lights permanently on, firstly a scan showed nearside front abs sensor fault so replaced both front sensors , this worked very briefly about 2 days then abs and traction light back on, another scan then said 2 valves open in master...