Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. jamesmartin

    Valve/Cam timing Petrol 2.25- am I over thinking this??

    have you got the chain on, if you have p aligned with the correct hole in engine block both valve lobes on no1 should be pointing down
  2. jamesmartin

    Valve/Cam timing Petrol 2.25- am I over thinking this??

    turn the cam one rotation
  3. jamesmartin

    I would just like to say

    was quite good that and some good music
  4. jamesmartin

    Gutted...

    its just the next logical step
  5. jamesmartin

    Checking the crank and big end bearings

    rtv is fine aslong as both surfaces are oil free,wipe down with brake clean or thinners first
  6. jamesmartin

    Checking the crank and big end bearings

    yes to both and use some stud lock on the conrod studs, bottom bearing shell on mains is likely to be most worn top on conrod
  7. jamesmartin

    P38A Automatic Gearbox Lucas Transmission Fix

    it will give more info on such
  8. jamesmartin

    P38A Automatic Gearbox Lucas Transmission Fix

    have you tried jacking up and turning a front wheel yet
  9. jamesmartin

    Rattle from front output shaft - Solutions?

    yes just remove the prop
  10. jamesmartin

    Rattle from front output shaft - Solutions?

    fit a new shield or better shield and flange
  11. jamesmartin

    Clutch Issue

    pulled a turbo hose off?
  12. jamesmartin

    P38A Automatic Gearbox Lucas Transmission Fix

    ? i would have just changed the sump etc on that one first still try turning one front wheel
  13. jamesmartin

    P38A Automatic Gearbox Lucas Transmission Fix

    jack one front wheel up with g/box in n,and using a brace on the wheel nut try and turn the wheel
  14. jamesmartin

    P38A Automatic Gearbox Lucas Transmission Fix

    rolling the truck off the loader wouldnt have effected box at all, not having both props on was your problem
  15. jamesmartin

    Disco 2 Alternator Vacuum Pump Oil Leak

    often its wear in alt bearings,so unless its a hose or pipe fitting replace the unit
Back
Top