Search results

hello all, Ive nearly finished my resto (3.9 G Reg) and have finally got all the Aircon ancillaries working (i think). 2 relays were not working initially but all sorted now. My question is that when i put the switch to the cold air symbol (1 before snowflake symbol) the condenser fans come...

Managed to find some on John Craddocks for £30, finally can get my front spoiler back on

Exactly like them but in the UK :) (and cheaper) Thanks Rich

Hello all, Does anyone have a spare front wipac rectangular driving light they want to sell? Ones cracked and i don't want 2 different on the front :) Thanks Rich

Thank everyone - plain it is Rich

Happy Mothers day everyone :) Does anyone know the difference between the rear lights on a 3.9 G Reg classic? I see there are two types , 1 with a black border and 1 without. Mine have without but the black boarders seem cheaper and my offside has a crack in it :( Rich

Many thanks locket, Regards Rich

Good evening all, Whilst on my journey of restoring my classic I can’t remember where a spacer type washer goes (pls see photo). I think it’s part of the front wing as all I’ve taken off is both wings etc. I’ll add a few photos. Many thanks Rich

Update .......tested all relays by placing a bridge across the heater / aircon relay first and all now works. Out of the 4 relays 2 are suspect. Thank you for all your help and advice Rich

Many thanks, I’ll test with a bulb later today. Looking at the wiring diagram it seems that fuse C7 comes directly from ignition to that fuse then to motors etc. Just seems weird that Aircon / heater motor all stopped at once. I’ll update later, Thank you Rich

Just to add to the bigger picture, I noticed the Aircon/fan motor load relay was getting warm when there is 12V going to it! Help!

Becoming a PITA at the mo. So I have no power to any of the blower fuses (everything else ok). When I put the multimeter on the heater / aircon relay and move the heater blower switch it gives me a good 12V so switch ok, I even put 12V across to the blower fuses from a known 12V supply still...

Update.....Drivers door puddle lights and electric mirror all work again (dodgy earth). Still baffled about the heater and aircon not working. All fuses checked and are ok, would it be worth checking the fan control? When i have the lights on the heater panel is back lit but when i touch heater...

Thank you for the assistance, I'm not sure about fusible links but it seems like there is one item that's affecting the blower and AC. Rich

Hi Henry yes and alternator and ECU- just in case. Rich

thanks chaps Rich

Hello all, I need to pull on the fab knowledge on here in regards to my heater not working. So its a 3.9 G Reg, the heater and aircon doesn’t work. It did before I took my drivers door off to weld a sill and now they dont. (Additionally, the puddle lights and door mirror don’t work either now...

Good Evening all, After a quick bit of well found knowledge - On my central locking (RRC G Plate) all the doors lock but when it comes to unlocking the front passenger door doesn't unlock. I see it moving very slightly. Someone mentioned that it was the small spring! I think ive found one on...

Great news many thanks Rich

Also to add to my last post - After taking my drivers door off to weld in new front sills the door mirror doesn't work (passenger does) and the puddle lights. Im thinking to re-check the wiring connections again. Additionally the heater and aircon have also stopped working. The car is still in...