Search results

If your local to me I’m happy to have a drive out and help/advice? Rich - NG9 👍🏻

Sounds incorrect mate. Once the box is in just take off the rear plate on the transfer box and fit the overdrive in (after taking off the nut etc etc). Rich

Thanks mate - series 3 roof with the standard ribs on the top 🤔

Hi troops, are defender Alpine windows the same size as series ones? I’m going to fit some as I’ve always liked the look. Thanks Rich

Hi all anyone got a cubby box with cup holders they want to sell? Don’t need a new one just for my winter / shooting hack. Thanks Rich

I refurbished mine and sourced the seals and bearings online @simplybearings.co.uk Cheap and good quality.

Hi all, after a bit of advice regarding a series 3 indicator relay. I was fitting a hazard switch but the indicator relay in the Landy is a modern one with 3 terminals. One goes to an orange indicator light. If I replace with an original relay (2 terminals) they don’t work. Please see pic...

Answered my own question after surfin the net…..get a picture of the original switch and highlight what wires correspond to the one you have ….simples. Now have hazard lights 😏

Morning all, I have a genuine Lucas hazard switch but the wire colours (only remaining 3) don’t add up to the harness I have from Auto sparks. I’m sure the 3 wires will do the same job (they go to the relays) but does anyone know what wire from the switch should go to the plug? Failing that...

Check the wiring that goes from the engine to the ECU, you'll most probably find oil / water will have made its way from the engine harness to the ECU giving you these problems. Normally a case of drying it all out and all should be well. Rich

.....Ive just removed my after market Rocky Mountain Grill https://parabolicsprings.com/products.html. Thought it looked better with the old plastic one back on :) Rich

great link Steve, thanks

Thanks mate 👍🏻

Thanks Steve 👍🏻

Hello knowledgeable folk. Can I remove my rear floor (SWB) and replace the supports (and top hats) with the tub on? Noticed that a few have holes in……. Thanks Rich

Thank you all, Great advice as always - scotch bright out and store away then 👍🏻

So I managed to find a decent 2 1/2 petrol 3MB cylinder head at Malvern this weekend. It’s cleaned up really well and not bad for £20. The number on my head is ERC 5899 but the other is 568750. Both look the exact same and the spare seems to have less wear on the valves etc. Also, should I...

I had this, found it was one of the springs on the rear which was pulling the cylinder back in. Check springs :) Mine was 3 & 8 on the pic above. rather than go to the stud on the back plate the spring went shoe to shoe HTH

Series 3 - No charging light - Me old thread

Ive just had this me self......it was the rectifier on the alternator. The build did light up though when i put an earth on it. I suddenly had no ignition bulb light and all charging stopped. New alternator cured it. Rich