Search results

So..loads of info on this but nowt much on the exhaust if i may. In regards to the exhaust from the Disco 200TDI transplant does anyone know if you use the original TD middle and rear exhaust sections from a TD? I ask as I've been renovating an old TD which is fitted with a 200TDI Disco unit and...

Hi Doug, In regards to the exhaust did you use the original TD middle and rear exhaust sections from a TD? I ask as ive been renovating an old TD which is fitted with a 200TDI Disco unit and need to replace middle and rear exhaust section but dont know where to start! Thanks Rich

Here you go....never had any problems with the wheels or tyres. Steering seems better after i swapped the original tubed rim fitted with 205s on Rich

Yes on the 5.5 rim and they don't foul on either lock (or protrude). Ill double check and try and upload a photo

Hi Boris i'm running 235/85/16 on new(er) defender tubeless rims. Rich

Hello all, I'm currently refurbing my defender 90 (G Reg). The steel wheels on it are shod with tubeless tyres which i think are fitted with tubes. The part number and sizes are Dunlop 1390, ANR4636 5.50F x 16 x 33. Thanks Rich

Thanks for all the replies - all fitted and yes, what a pain to get some on. Rich

Thank you for all your help and advice. So.....after pulling the carb to bits, messing with the dizzy etc it was the 'new' condenser from a well known online shop. Found it knackered after fitting an old one. Started straight away and runs lovely. All the best Rich

Hi can someone please show me how the spark plug leads go from the dizzy to the spark plugs on a series 3 2.25 petrol pse. Ive faffed about for hours to try and get it to fire using TDC, checking the dizzy drive as per manual. just need a picture of the actual set up. I think im 130 degrees...

Many thanks, i'll nip up all intake and thermostat housing, fit the new drive belts and see how the leak is. To be honest its only a small leak so may not be worth the work to find it - until it gets worse ;) Rich

Hello knowledgable people, Ive a 3.9 RRC and have a slight coolant leak, its only noticeable when i stop and only leaves a 3 inch diameter wet patch. Not even noticeable in the header tank, but i think I've traced it to the inlet manifold area at the front just behind the Dizzy. Could this be...

Discool many thanks, Just been onto LRCat and got the part numbers - now to buy all 4. Thanks Rich

Morning All, A bit of help please. I have a RR Classic 3.9 non serp. I would like to change the 4 belts that drive the viscous fan, the power steering pump, the alternator and aircon I can't identify either due to age and no markings on them. Most websites (Rimmers etc) state only two and name...

Ah ha, many thanks Ratae

Hello everyone. When i brought my RR Classic i inherited a few items, one of which (Stainless steel carpet trim?) does not seem to fit my RR boot floor. Im thinking it maybe for an earlier RR (mines G plate) Thanks Rich

also try these guys. great service and advice when i rebuilt mine https://www.onlinegearboxparts.com/product-category/land-rover-fairey-overdrive/

Happy Easter everyone, Before i go out and tinker, I've ordered off tinter web 2 x used switches for my electric windows (G Plate 3.9 Classic). I only need one switch but the one i'm replacing has an A on it and the spare one that came with it has a B on! They both look the same so could i...

Thank you for all your help / replies. All crystal clear now, just wanted to make sure all was working (as best it could for a RR). Rich

To the RAVE it is Many thanks

Hi Datatek its a 1990 Vogue 3.9. I thought aircon was selected when you moved the selector switch to the snow flake symbol not the cold air outside symbol (the one before) or is this also aircon? Thanks