Search results

The plug fits into the heater - however if you just want to enable / disable it then why not run a wire via fuse link 5 in the engine bay to a switch and back? You MUST ensure that the fuse is still included and that the switch used is rated at more than 20A or you'll have a very warm car as it...

If you connect a +12v feed to pins 1 and 3 then the heater should operate. Pin 1 is the temp sensor switch which feeds +12v when below 5cPin 3 is for a 12v input from a timer switch. The pins are numbered on the 6 way connector. Hope this helps.

most filters etc are made by OEM for all the big manufacturers. brakes - one point i would say is be careful of the friction lining - too hard = last forever and wear out discs too soft = ace stopping but SHED LOADS of dust on those alloys! Remember if its too good to be true it prob is. Try...