Search results

there are some serious litigation and liability issues when supplying information for payment it is a mine field and to be honest and if a fee is paid indemnity insurance etc would be required say if someone gave bad advice and someone had paid for it. I like the way we can help each other on...

you may also need to fit a relay in the fuse box mine needed the green relay fitting it was the last open way to take one.

well today I had a test done to see if there were any hydrocarbons present in the air in the bottle and there was none. It seems the pump suggestion may have some ground!! Nick.

I see your pressure point however to see the bubbles i have the bottle open so the water is not at pressure as when it is when the lid is on!

An update folks, I have noticed the little bubbles stop as soon as you lift the revs even a small amount over idle and the small pipe then flows coolant, I have noticed the water pump pully has some visable play in it and therefore think given that there is no overheaing, loss of power, cross...

yup small radiator pipe is clear and gets hot so is flowing ok when the heads are off how can liner slip be observed? btw the bubbles start within 10 secs of starting and same if hot or cold!

1997 4.0 V8 P38 I have reciently changed the radiator, and renewed the antifreeze bleeding the system as per RAVE however today I have noticed when the engine is running there is small bubbles rising from the bottom of the expansion bottle. I reckon there must be a leak on the head gaskets am I...

Interesting you have ordered a ecu I was told that that part is no longer available from LR where did you order one? and how much?

Anyone else have any suggestions its baffling me and wonder if there is an easy way of checking the BECM has the correct output?

I have the same problem too. the voltage should give 5 v when wheels stationary and 2.5 v when wheel rotating and I get 0.44 volts. Mine works most of the time except on hot days, all the wiring is ok and connector behind kick panel is clean. I reckon its a dry joint in the circuit with the...

Alan Smith Garages Manchester Street Derby DE22 3GA 01332 290326 I had a very good level of service from them!