Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. dizzytim

    Ooops, Lost me Landy ... :(

    I put them on mine Paul, proper over engineered top stuff, going to put front caster corrected on front from adrenaline as like their products :)
  2. dizzytim

    Adrian Flux Insurance

    Will be interesting to see how much my renewal will be, on classic insurance and had a little bump with a Astra @ about 3mph, no damage to mine but Astra didn't look so good
  3. dizzytim

    Starting problem (intermittent)

    Immobiliser cuts the starter on mine, could be stop seleniod sticking, have come across this before
  4. dizzytim

    Off Road Fabrications

    External roll cage for D1 and rear winch bumper :) or maybe roof sliders/alpine window protectors
  5. dizzytim

    Ooops, Lost me Landy ... :(

    Crack on Paul you'll get there :) will be good to see it back on the lanes
  6. dizzytim

    Pumkins Flex caught on camera!

    I know it needs front radius arms/turrets and shocks changing on front to get more flex, it is moving but not as much as I want, it's up about 5" from normal in this photo! That rock is about 3' high
  7. dizzytim

    ABS Air Gap

    Check your wheel bearings as will make air gap too big if there is play, push sensor all the way in and let the sensor gap set itself when you drive it
  8. dizzytim

    Pumkins Flex caught on camera!

    Disco's do it too :D
  9. dizzytim

    How to stop the crankshaft pulley spinning?

    If you put power to the spade connector ( only 1 on my starter ) it will energise starter and engage and turn starter, can't understand wy it's not turning engine over/ front pulley not turning ? Thought you was shorting across the nuts to put power to the motor, when solenoid is triggered it...
  10. dizzytim

    How to stop the crankshaft pulley spinning?

    Shorting the starter will make the motor spin but you need to power the trigger wire ( spade connecter ) aswell to engage the starter first, as it's a pre engage starter
  11. dizzytim

    Wobble when accelerating and leting off

    When mine did this it was the rear trailing arm bush on one side, same thing as you desribe was happening to mine hope this helps helps
  12. dizzytim

    Broken down in 300tdi in Uttoxeter!

    Lol good luck with that time eta, I work for the Mansfield group as a tech, last job I did was an AA job and was only about an hour late :)
  13. dizzytim

    Broken down in 300tdi in Uttoxeter!

    Well Sam at least you'll get home at some time this weekend lol, was good chatting on phone pity it couldn't be fix at scene, at least you'll be saving on fuel on the way back :)
  14. dizzytim

    200tdi tapping!!!

    Thanks for that info will remember that for future
  15. dizzytim

    200tdi tapping!!!

    Could be as you say or vacuum pump worth a check
  16. dizzytim

    Provisional Lake District idea 2014

    Right taking votes now! Next to your name simply put one or two……. Option one is two long ish days with a mix of road and green lanes Option two is one day slightly longer than the other with more road driving Sorry the texts not in red nick2303 Sarah90...
  17. dizzytim

    Provisional Lake District idea 2014

    Put me down for this please
  18. dizzytim

    Help needed L230 transfer box

    Thanks for that will get one ordered, might be changing the box again if it's too low ratio at 1.6, bought it as a 1.4 ratio and never seen the numbers on the casing until I cleaned it off
  19. dizzytim

    Help needed L230 transfer box

    Just realised its a 1.6 ratio transfer box oops think it might be a little revvy at speed lol
  20. dizzytim

    Help needed L230 transfer box

    Hi I've just replaced my transfer box for a 1.4 ratio due to large wheels, I have a disco 300tdi with R380 box, trouble is the input gear on the transfer box is worn and would like to replace with new so as not to damage the gearbox output shaft, the question is what part number am I looking...
Back
Top