Search results

I am experiencing a problem with my 2004 def 90 td5 which has occurred twice now at very inconvenient times, When driving the engine suddenly cuts out, Turn the key and it starts like normal, and has no problem, accelerates normally, everything seems to work OK, (not that I've had time to...

Evening all. Following on from my first post concerning the def. front window regulator , it was so loose I was able to get the motor off the scissor mechanism. It's gone again, only this time I can undo 2 of the 3 motor fixing screws but I can't get at the third one to separate the drive...

Has anyone had experience on the electric motor for the window regulator coming loose (unscrewed) and causing the quadrant to miss the gear on the motor? I've had all the assembly out of the door expecting it to be bent and twisted after it failed yesterday, but the only thing I can find is...

Anyone experience of headlight switch problems. I've got it out of the housing, and it looks like the headlight contact has been hot and sunk into the back board, not a lot but enough not to make contact. But why ? Fuses are OK. Side lights, and dashboard panel lights ok., but switch to...

Yep got that one covered, got a bit of credit card stuffed in it, ok. Till you need to open the bonnet though, but stops the rattling Cheers Tboy

I think... I have found the problem, The radiator grill was loosly fitting on the top lugs due to age , so thick tape on the body work and it seems to be different . Could be the reason I only had it at 100/120 kms/hr, affected by that level of draft. We will see, can't see anything else at...

Thanks for the onfo, that iliminates one source of probs, now to start the search elsware. Cheers Tboy.

Is the speedo cable driven or electronic on a 2004. Def td5 I've started getting a curious tapping noise at 100 to 120 km/ hr. That makes me think it could be a speedo cable, not all the time but enough to think i need to do something about it. So befor I take the dash out be nice to know...

Thanks for the info ,LRWorkshop looks a good site thanks again.

Can anyone tell me the size of the crush copper washer on a td5 90 380 gear box please. I don't want to change the oil and have to put the old one back in and I dont have another means of taking the plug to find one that fits. I am in portugal so not easy to find parts like this for landrover...

The above coment is not helpfull,

Forgot to mention 2004 td5 def. Thought I'd written it, senior moment. I can't find anything like what is needed. Cheers

Good morning everyone, does anyone know where I can get a half inch drive torx socket for getting the filler/level plug out. I live in Portugal and thought some body might know of a supplier on line, Cheers

I have a temp guage which is showing about 3 mm right of cold when on a run. In the past it has always shown about 4mm left of center on the guage. I've only noticed this recently and due to this covid fiasco,as it hasn't used very much. Could it be the thermometer sticking?, and if it is how...