Search results

What does holding the sling do? I will try tomorrow

Oh really, I just jumped on it again today and I swear it’s impossible it’s the bearings they sound and feeling fine. I did however notice that the offside drive shaft was slack as you like, loads of play in and out. No play on other side . So I’ve ordered one up and I’m hoping it’s that...

Fair enough, do you think the give away to wheel bearings would be feeling it in the steering wheel?

Would explain why when I jacked all 4 corners and ran it I couldn’t hear anything. It’s on 115k, it does feel like wheel bearings. Just was surprised as could t feel any play or hear anything when spinning wheel.

Hi guys, we have bought a freelander 2 to go with our freelander 1’s. bought it with a list of jobs needing doing. All fixed now and just passed it’s mot. But….. there is a noise front the front somewhere starts around 35/40mph (wur-wur-wur) noise. If I speed up noise is less noticeable. Does...

That doesn’t sound good, it runs very smooth though. You wouldn’t even think anything is up if it wasn’t for the smoke

Yeah probably but it doesn’t seam to clear, wouldn’t a leaky injector clear once running and up to temp

Hi guys back again, got a white smoke issue. Lots of white smoke when revved, gets really bad when driving. Then if you come back and let it sit it clears on idle but then after a short while it’s back when you rev it. absolutely no change in power, it drives really well. Im thinking turbo...

Hi guys, just checking in. I replaced lift pump as I could hear it wasn’t working and it has fixed the problem. Amazingly it must of ran on just the hp pump for a short while.

Will do tomorrow, weird how it’s gone from driving but extremely slow to now no start at all

Hi Andy that’s very kind Thankyou. it’s not starting at all now, and no lift pump noise. Is it possible (as it was driving earlier) that the hp pump was running the car with no lift pump?

Just noticed the lift pump isn’t operating when ignition is turned? Absolutely nothing coming from the wheel arch at all. Could this cause it?

All fixed mush, cleaned lubed then greased the bar and all is well :)

Hi guys, my gf freelander has developed a problem. It seams to me as is driving but with no boost. That’s how I’d describe it. Starts a drives fine no smoke but incredibly slow. I’ve ran the codes and nothing stored but one code did come up (well not a code) but “low side fuel pressure sensor...

Hi I’ve just done a clutch that was slipping and on fitting the new clutch it’s still slipping (very silly of me for not checking these things before) the cause is actually a partially seized fork/swivel bar thing. It’s not fully coming back leaving the clutch partially engaged. is there any...

Nothing obvious wrong, although the actual groove for neutral feels bit sloppy. definatly strange as every gear selects fine at the little light comes on next to the selected gear. Apart from neutral.

2005, it definitely seams as if the gear selector area that’s the issue.

Hi, I’ve been getting a Freelander 1 td4 auto ready for mot test. having a problem with the tc/hill decent light. Start the car and they are off but soon as you select drive and accelerate they light up. I have ran the codes and got p0705, I’ve noticed on the gear select the light doesn’t...

Got to say I’m a bit worried about blasting a load of stuff in there? What does e wry one think? the weird thing is if you slide a paper clip a little ways in it releases!?!

Hi guys, just purchased a Freelander 2 i6 hse and absolutely love it. the problem I’m having is once they let is in the ignition it’s very hard to get back out. Only way I’ve found is to slide a paper clip on top of key and it helps it release. how easy is it to change the ignition barrel and...