Search results

Cleaned ecu plug as a little tiny bit of oil no joy let it purge and running fine now

Top man I'll try get it plugged in today

The engine light isn't coming on bit should still store codes ? Also would fuel pump cause the misfire ? I was leaning to injector loom or crank sensor but unsure til I have a proper nosey in the daylight. Don't suppose there's a list of helpful fellas with scanners on here ? Would give a good...

Right the td5 struck again. Last week she was a cnut to start purged it and foot flat to floor while cranking and eventually started. Then up until today fired first turn of the key and ran as it should. Earlier whilst at some traffic lights she sounded lump as though on 4 cylinders not in a...

🤣 didnt even read the date 🙈

As title really 16" beta kids electric trials bike my lads outgrown it now and the youngest has no interest in bikes. 2 battery packs and charger collect west yorks possible meet or deliver for fuel. Would swap or take px disco 2 HD bumpers roof tent or a set of mach5 zu style wheels and tyres...

I've a beta minitrials 16" electric 2 battery packs and charger would take 450 to get it out of my way. Lads upgraded to an 80cc now.

Well she's back running sweet as a nut fingers crossed it stays that way

Its got the green oval on we need all the luck we can get 🤣. Still love em though 🙈

It's all sat nice and tight still I've managed to get the helicoil in will see how it goes.

I've rang round local nobody wants to do it if ibwas competent enough I'd do it myself but don't quite fancy taking the risk. I need it sorting asap I take Mrs and kids away next Tuesday 🙈😭

It's the bolt that holds shaft down to the head that's stripped

Anyone had it happen ? It started making a pop pop noise on my way home so taken rocker cover iff and the rear bolt closest do windscreen has pulled out causing the shaft at the next bolt hole forward to Crack. Now the question is has anyone else had it happen and can it be helicoiled ?. I know...

Wouldn't mind tagging along if your going in the next few week ? My pals off a he road x the min so we're not getting out

Anyone local to brighouse able to give a hand fitting a crank pulley ? Never done one or seen one done I'll get the dirty work done if your able to tell me what needs doing to what i will get a few beers in or whatever will be over the next couple of weeks when I can afford to get one sorted

my Reply didn't send .....I've tried looking for some but not available on Amazon I'll keep looking.

So all I do is spray it all over the plugs etc and she's good to wade ?

Seems good stuff but does it actually work ? Someone said wrap the ecu in a plastic bag cable ties around at the wires and then fill the battery compartment with expanding foam but don't quite like that idea lol

Any ideas to keep the ecu dry where it sits under the bonnet ? I've looked at the extended looms but don't have the funds around at the min to justify the £280 for one. Surely someone must have a waterproofing fix ? All help appreciated.

I can definitely say it took some lining back up at the roadside to get a bolt through to get me home ... On the plus side id picked a new watts linkage up ready to fit so the bolt came off a doddle haha.