Search results

Hi thanks for all your input SIERRAFERY MUCH APPRECIATED.

Hi just an update to the immobiliser problem replacement ECU cured the problem thank you.

OK THANKS VERY MUCH FOR YOUR HELP WILL TRY A DIFFERENT ECU .

Hi i have followed your instructions it learns security code no problem then went to set alarm to not fitted and started engine just the same 2 second run do you think it is not getting the signal from the BCU to the ECU IF SO WHICH WIRES SHOULD I BE CHECKING FOR CONTINUITY THANKS.

ok just an update got nanocom out again this afternoon and managed to get into ecu and it says ecu imobilized does that meen it is caput look forward to your replies thank you .

ok will do that this afternoon when get back from work tried quickly the other night but could not get into the ecu only bcu and every thing seemed ok in there thank you col.

Hi thanks for the info i dont think it is imobilzed it starts and runs for a second or two and then stops and you have to lock doors and unlock and then it will start and then stop again we have tried with the eka code but just does the same thing which pins on bcu to ecu would you check for...

HELP NEEDED ON HOW TO RE SYNC BCU WITH ECU WITH NANOCOM IF THAT CAN BE DONE AS IT HAS IMMOBILISER PROBLEM.ON MY DISCO 2 TD5 2000 .

Hi looking for help in finding out how to check continuity of wires from BCU TO ECU for immobiliser which pins to check thank you.

ok thanks for the reply will have a look ans see if any one reasnably close to me thanks Col.

Thanks for the reply i see there is someone on ebay that hires them out that might be the way to go thanks Col.

Thank you for the welcome. just a bit of an update to my quandry the disco asksepts the eka code but still cut out 2 seconds after starting and also forgot to mention the rf receiver as been replaced with a knew one as the dreaded water got...

Hi looking for some help with my discovery 2 td5 Hi having problem with my disco 2 td5 2000 model,my problem is after starting the engine cuts out after 2 seconds,we have had the bcu away to turner diognostics and all is fine the disco locks unlocks with key fob emobliser light goes out heater...