Search results

Thanks for your replies. Pump on order.. Cheers

Thanks for your reply. Don't think there made any more, tried to find on the net. Do you have a link? Thanks for your time. Cheers.

Hello all. After a Mis-fuel putting petrol in my TD4, decided to change the fuel filter under the rear wheel arch and while I'm there the pump. Been running on the old Pump and filter with no problems since the over sight,and getting all sorted before the petrol left the tank. Fitted a new...

Thanks Nodge. This mishap has seemed to put things in better shape, but will not be doing it again in a hurry. Cheers all.

Hello all. Update.. Went down a different route as not sure about getting it right with the relay. As the fuel pump is accessed on the rear o/s wheel arch, decided to take Andy,s advice, but further down the line. took the plug connector off the pump and the OUT connector off the fuel filter...

Thanks Andy.

Hi Andy. Can I ask, If I disconnect at the HP pump and turn the Ignition on would that not empty the tank? Stick with me, I am a mechanic numty.

Thanks for your reply Andy. Is that the filter under the rear wheel arch? Just to ask, I would need the ignition on for this, yes? Thanks for your time. Gary.

Hello all. This afternoon went to fill up the Td4. In short Iv'e put 30 ltr of petrol in the tank by mistake. Feel such a Twonk. As I live round the corner I drove it home, It would seem the petrol hasn't come through yet. Is there any way I can drain the tank? Un-do a fuel line or pump it out...

Yes. I believe not many know that they could be buying tyres that have been on the shelf for a good few years and have not much life left! And many Tyre outlets won't tell you so they can get rid of old stock. Cheers

Kev12. Good call. Thanks. Cheers.

Thanks for your replies. On Brit Parts, this seems a common response. Nodge68. Given your reply I thought more would have responded. As it goes, and I hope not off subject. When I got me old MG, MOT'ed he told me that next year any Tyre over ten years old is a fail regardless of tread depth. So...

Hi all. LAND ROVER FREELANDER 1.8 Stabiliser Link Ball Joint Dust Cover Boot -Small x 2 | eBay I fitted for MOT last year o/s and n/s front wishbones complete with ball joint etc, On looking them over they don't look great, not split yet, but would rather change them before road ingress gets in...

Cheers Pal. The very thing I'm looking for. Thanks..

Hello all. My spare wheel cover is looking a bit tired and tatty. So looking to replace or if possible do a make over. Any one come across a decent replacement or Vinyl sticky back to go over a faded cover. Union Jack would be good. Cheers.

Hi Pal. Like the look of that. Would come in handy for a hobby I have, and would solve a problem. Could you post up some more Info. How it,s fixed and how much/ where from. Thanks for your time. Cheers.

Hi andyfreelandy. Post your Pic's pal . very useful . Cheers

Hello all. Thanks for all your advice and comments. I would stay away from the Halfruads gauge that also features in Auto Express article. No where near worth £12.00 plus. My idea is.. Get digital times two for comparison. Cheaper than a new IRD?? cHEERS ALL.

Nodge68. Thanks for your reply. This the kind of kit I'm looking for. When checked, all four wheels were different by as much as 3/4 pounds. Cheers.

Hello all. I'm in the market for a reliable and accurate tyre pressure gauge. I've posted here because 1,I'm a FL1 Owner, 2. I know how important tyre pressures are to Freelander owners, so can point me in the right direction. I did spend £12.50 on a Halfords gauge, but with in no time did not...