Search results

Hey all I've had my roof off for the summer and am putting it on again for winter. It was obvious when I took the roof off that some of the fittings weren't original. Like there were just long threaded bolts at the rear corners and no rubber washers or offset metal ones. I have purchased the...

Me again, While messing around with my distributor I noticed a crack in the base plate. These seem surprisingly expensive to buy second hand, presumably they are NLA. The crack is at the lower end of the tube where the inner drive shaft exits. It runs about half way up the tube but not as...

Ha! Thanks for that warning! I got a pretty sharp jolt since last posting so I guess that means the coil is working! That'll teach me to hold the HT lead near the plug! I looked again at the seating of the dizzy and the lugs are offset slightly so it looks like it can only go in one way...

Thanks Kermit, So it should be possible to fit the dizzy both ways - mine won't seat when turned. This design of electronic dizzy has two wires coming from it, a red that goes to positive terminal and a black that goes to negative. And the advice on SimonBBCs site suggests that the system...

Happy Saturday all, Mine's not so happy. I have been having running problems with my '75 2.3 petrol. It would run well for a while but then die when it got hot. It would then be fine again when it had been sitting for a while. As per advice on here I tried a new condenser but that made no...

Oh I know, just thinking ahead to which engine to rebuild first! The landy's oil pressure light comes on very briefly when I stop at lights but my Spitfire's oil pressure has been marginal for 40 years. I'd love to get stuck into one of them but between day job and having just bought an old...

I'm only 10 years from retirement...soo many things to check when I get there...!

Thanks gents, could be a cheap fix then. Not sure exactly where I read about the valve seat issue. I had a quick browse there and there are clearly plenty of opinions on whether it is a thing or not. I'm now using two additives per fill, one for lead, one for ethanol. Cheers, Al

Happy New Year to all, It's been a while since I was on here. My '75 SIII (Lenny) has had little use for a couple of years since we were renting in town. Now back in our own place in the country and Lenny is back at work lugging trailer fulls of wood, etc. I've not done much other than an...

Thanks all. Shame I have to go to work in the morning - I now want to keep tinkering with the Landy!

Many thanks, I think I'll wire up an LED light on a toggle switch for the mo and then look into the gearbox switch in the spring. Cheers, Al

OK, thanks all. I'll start with the stabiliser. I see some bloke in Devon makes solid state ones - tempted to fit one anyway to replace the 50's tech that's in there at the mo. Just need to work out the simplest way of getting the speedo out - presumably those big slot headed bolts at either...

Yep, there is a dash lighting switch which isn't switching on the dash lighting. Good place to start I guess, to check power and earth. Earth problem could be root cause of all this but probably means taking the pod apart? How easy is it to pop out a gauge? Al

Me again, On the subject of usability and winter driving, for some reason my fuel and temp gauges and my instrument lighting have all stopped working. I have warning lights for choke, engine oil pressure and full beam on the dials. I've checked fuses and they all seem OK. I fitted a new fuel...

Hey all, A very belated HNY to you all. As you can guess from my posts, I go through phases of using my SIII. It worked hard in the spring of last year when I moved house but hasn't been doing much lately. Then, because it snowed briefly a while ago, I thought I'd better make sure it's in...

Mine doesn't look any different when I wash it...so I think I only did that once just after I got it! What's that setup you have on your sills? Is there something strong under those sill finishers? Al.

Hey all, I've been getting great use out of my old girl recently, moving house, towing trailers full of crap to the recycling centre etc. I've also been using it generally and I must say that the more I use it the better it seems to drive. Those springs do seem to loosen up a bit. Anyway, all...

Hey all, On account of moving house I have put the front wings back onto my ‘75 SWB and given it a service. It is now happily motoring about and all is well. Problem was, when I went to put my wings back on I decided to use the nice new Stainless fixings that I had bought in a kit from Wrights...

Hey all, I need a new coil and was thinking of fitting an Accuspark high output coil. I fitted one on my Spitfire and it seems happy with it. I’ve forgotten all the malarkey about internal and external ballast resistors. The accuspark coils come in ballasted and unballasted. Which one do I...

seems there is a standard fix...:D