Search results

yes it did and he programmed it it opens door and starts vehicle

But there is nothing really to stand on at the front by the drivers door for example is it possible to get ones that do give a step up so to speak for the shorter driver?

He had one in stock the price was £100 aparently he has to decode and then recode The new key was £79.00 which he had to order in looks just like a LR one but no LR inscription on it

2005

Thanks Andy

The freelander 1 I just aquired has a side step running the length of the doors both sides you can use them for entry to rear ok but the front part seems to sweep in towards the vehicle so all that sticks out is the outer rounded edge of the side step is this normal?? or are they twisted as I...

The doorlock on the outside with the key you can lock doors which sets the alarm then press fob twice to disarm/ open doors But you have to unlock drivers door with key to access which is how I bought it and the inside handle has been working fine untill now with hand inside panel and using...

it is probably be less as picking it up next week so a deal could yet be done.

Morning everyone, The on going saga of driverside door, Fitted a new after market window regulator made sure the door lock cable was inboard of window and regulator, all fine untill today we have worn buttons on the key fob can be awkward to operate sometimes so goes to timpsons for a new fob...

found onecomplete with new carrier bearings and no other probs when removed £200 complete

Nodge I have tracked down a complete prop shaft front to back with recent carrier bearing replaced for £200 and it is local to me I was thinking of purchasing it as my ird may be fine, but if not at least I will have a prop ready for fitting.

I see IF we did go down the road off putting it back to awd I would have to let the garage I use do it, Iam 64 now and at 4ft 3 inches tool with a couple of discs in me back gone and a colliod cyst to contend with I could not do it, I would need a prop,Ihave seen a complete prop with vcu which...

Thanks Nodge we think we might leave it as front wheel drive. What are your thoughts on this?(we only drive on country/town roads)

so do you think I should buy 2nd hand prop shaft and bolts etc

Are they ok as 2 wheel drive the cost is to much as to change to awd I am 64 wife 66 just want something to tow caravan

so you were lucky with a second hand complete prop assembly for freelander 1?

Right The props and centre Bearing? are missing on my 2005 Freelander 1 TD4 but the flanges are there for bolting on the said props. The guy I bought it from thought he had got an AWD when he purchased it. He did not have the propshafts, do I gamble and have a new set fitted, or do I try and...

Ah I see Thanks for that much appreciated

Well I bought an aftermarket regulator for drivers door stripped it down then had to rebuild the motor etc to the the new unit when it was all in place the bolt through the metal strip could not be fitted as the " captive nut" on the motor plate on the new unit did not line up. Infuture I think...

thankyou