Search results

I seem to have found the error. The right front sensor does not transmit any heights. This is the one I swapped. I hopped around on all sides of the doors and all the values changed except the one on the front right. This value always remains 0. Should I buy the part again and exchange it or can...

So it has to be right, right? The correct one has been ordered.

I will adjust the height of the axes later for the default height. Maybe something is wrong. I added images because this is in the GAAP guidance (see picture 1 and 2). I should get the values for the axes during the height calibration, right (see picture 3)?

Yes, I ordered the right one (3PIN) and installed it again straight away.

The height sensor is installed 100% correctly.

Thanks for the quick responses. Nothing was changed in the suspension. Only the right height sensor was replaced and the problem has been there ever since. I set it so that the front is 493mm and the rear is 483mm. In the 4x4 Info everything is in a row. I'll take a look at the live data...

Hello, I received the GAAP TOOL today and calibrated the heights straight away. Then I drove and no red error occurred. When the Range Rover is stationary and I change the height to off-road mode, it goes back into ''extended mode'' and pumps the front of the car as high as possible so that I...

I just found something interesting. If the Range Rover is over 20mm too high it automatically goes into extended mode. The same thing happens even if you are 20mm below the specification. Factory specification should be 493mm at the front and 483mm at the rear. I just bought the GAP tool and...

Hello Land Rover friends, sorry for my English, I'm a little rusty. I've been having a problem with my air suspension since last week. It all started when a height sensor broke and the car showed me this in the 4x4 info (see picture 1) and I got the orange “suspension fault”. The car still...