Search results

Okay dokay, this sounds good! Thanks very much for the help, I’ll be back shortly with the voltages. Do you just poke your multimeter needle into the plug on the back of the alternator to test the smaller wires?

Charge light is on then turns off when the car is started

Mornin all, So the other night, the Speedo and headlights wouldn’t work, then the car wouldn’t start. After charging the battery up, it was once again starting fine and dash/headlights operational. My alternator is not charging and could this be that it is not exciting? I was testing the wire...

Having done the injector washers and seals myself, I would say it is doable but lots of patience is needed! I used a lot of the different Wynns treatments that are available and these seemed to help a lot with smoke. They sell one to reduce smoke that is poured directly into your engine.

Sure, if you’re in the market for an Aldi special buy grinder

That grinder needs to be decommissioned ahah!

I measured them so hopefully I’m capable of that:D

You're right! Feels great to get the job done in the end right?! My next task was to replace the front and rear prop shaft UJs. I thought I could do it with a hammer and socket but they will not budge:D taking it to a local mechanic to press them out!

Hi, cheers for your advice. Thankfully I have managed to get it done. I just used a lot of heat and WD40. Eventually, I was able to undo the nut and the split pin broke off as I undid the nut.

May I recommend Keswick green? Oh wait, everyone has that

Unless you drive your Landy on the road regularly, in which case they stop it from listing like a torpedoed ship when you go round corners at any reasonable speed. I would love to just leave it but i use it on road quite regularly so need it to hug those corners:cool:

Too many times:D we'll learn one day

Can't have two landies of the same colour on your turf? :D

Good tips! Thanks for this, I was using a heat gun on it which seemed to be helping out. Seems like its a case of getting that nut off then

Cheers! That’s actually my old one, I’ve got a TD5 now (just updated my avatar). Do miss the grunt of the tdi tho. You going for a heritage look or more of a modern machine?

I wonder how many mistakes I’ll have to make before I learn from them on these landies:D

Good shout! You’re rightit was one of those “I’ll just grind it off” moments without thinking first. What a dick ahah

That’ll be a good idea if my grinding is accurate enough

Now that does seem like a good idea! If I’ve exhausted all the easier options I’ll give it a go! Thanks mate

Cheers Phill! The nut is so seized and has a split pin in it so I don’t know if it’ll be possible to remove it:(