Search results

A lot of used ABS modules on ebay like this https://www.ebay.com/itm/325634430706 have following texts: EBCM will require initialization to your vehicle and IS NOT plug and play Module requires programming to the vehicle at this point. So... how re-programming is done and what tools are...

BTW, I bought BCU off ebay, swapped with the existing one and my problems are gone. I also don't see the same error codes I saw with the previous BCU.

Discoverd that after replacing BCU (that fixed weird problems with rear doors/tailgate unable to unlock and other stuff) that my keys do not working to remotely lock/unlock. Using the physical key with the door lock works, central locking/unlocking also works. How do I re-sync keys with the...

2 tools I got - LAUNCH (going to sent back soon and ask for refund) and All Comms III read the same errors: ABS - Precharge Pump Air Susp - CAN Bus error What people are saying all over is that these errrors are masking the situation that ABS module has gone bad and these errors are cascading...

An update. Ordered from Amazon this thing to understand/get 'real' codes. Arrived today. Well, seems it goes back tomorrow for refund because it does not even display code numbers. Plus all the support is in China, via Whatsupp and all 'inspection reports' are uploaded in Chinese cloud....

OK, thanks everyone for your input.

The ABS code I see is 'Precharge pump'. Is this something related to pump or something else? I will have to take the car to the dealer and pay $250 just for diagnosing the issue and I would have zero trust based on past performance of mine and other people that what they say is accurate. I...

Well, all of them are covered with tape. The 6-pin one I am talking about is the one stucking out and not plugged in. I've also got opinion that it might be there for features that was not installed in the car. Yes, I was reading about this as well - there were feedback that you need to enter...

Today I swapped BCU on 2005 RR HSE. However when disconnecting cables, I noticed that there is also 6-pin plug what was not connected to anything. A quick inspection did not reveal anything nearby where that cable can be plugged. Do you know what it is for?

OK, a little bit more information... Today I swapped BCU - got replacement off Ebay - due to all the weird problems I was experiencing with unable to unlock read doors/tailgate, roll down windows, etc. I was getting bunch of Servo-valve or connections open circuit messages when reading BCU...

So at another forum someone >12 years ago described a problem that looks very similar https://www.rangerovers.net/threads/eas-inactive-brake-abs.43573/page-2?post_id=376564#post-376564 Now, the author said at the end that it was due to faulty ABS. Plus he had problems that I did not see -...

Thanks for insights. Regarding the tool - the software the last 8 chars are 5A181916 so the tool should correctly work with them. Now, I got what I got and if this tool (apparently) does not read what you are saying then I have to take it somewhere where they can and I don't have too many...

I don't know what are B codes. Could you tell? So... what would be the right course of action to fix Air Susp. Inactive/HDC Inactive message/situation? Just to recap: 1. Front air springs and all 4 height sensors were replaced 3 months ago (spent $2700 on it) 2. Only suspencion and HDC...

What can cause CAN Bus fault and how to fix it? I am now having air susp inactive/HDC inactive message on 2006 RR HSE US model and only error code ALL COMMS III reads from air susp unit is 0x0032 CAN bus Fault.

Once I put it on maintainer after 12h it was showing as fully charged. Also the servie folks told me that when they swap batteries they are fully charged.

Interesting twist gentlemen - yesterday went to Walmart to check the battery (battery is less than 2 y/o). Check showed that it was doing 600 CCA from 900. It was replaced under warranty (3 years) with identical one and I paid out of pocket $6. Now I have brand new battery (almost -...

So the right procedure would be what - check codes after 5 min idling? When I took battery for test about 6 month ago I was told it was fine by three different shops. I will ask repair shop check again, but would appriciate knowledge how to check/ensure that battery is good and rule out...

12.5V. Will leave for 2 days and re-test again. I had no problem starting car after it was in parking lot for 12 days.

Well, I am planning to remove and send BCU for repair once I take vehicle to shope for all fluids replacement, plus replacing power steering pump and the mass air flow sensor... Will write here about results.

Repairing procedure was mentioned in this post at another forum. Also another guy mentioned option to send BCU for repair