Search results

Hi guineafowl, the hose is from the pressure regulator to the front of the cylinder head. The regulator end is easy to get off its the other end that looks difficult. The leak is from the swage on the metal pipe to rubber hose.

Hi everyone, long story but cut short. So- Defender 90 04. Had a fuel leak, tracked it back to fuel pressure reg. decided to repair, found lots of good advice on internet / forums etc. wasn't as difficult to remove as i was told it would be, cleaned it down put in new reg. o rings, gasket...

Yes i separated the plug, all good. I'll have a look at the loom as you say at weekend as i've got to replace the rocker cover gasket, which i hope will cure the oil leak. The pump seems fine, as i say its just when i pull up and about 10seconds later it seems to sort its self out. Might have a...

Had a look at the plug and all around, no sign of oil at all. I'll have a look at the connectors on the throttle pedal next.

Thanks neilly I'll have a look tomorrow. If there is is lt a new loom

Happy new year to all, Defender td5 04. When i pull up at the lights or junction the engine starts 'hunting' or as if its only running on 4 cyl. after about 10 seconds it returns to normal tick over. otherwise its runs fine. If i blip the throttle it sorts itself out straight away. Not a big...

Could anyone who owns the above please give me the distance between centres. i'm about to make a couple of modified ones to fit on my bradbury jacks. thanks.

Cheers

Thanks for that, so if it is the bearing can i replace it and the pin without removing any of the other swivel parts.

morning, My 04 defender developed a bit of steering wheel wobble at low speed, checked the front wheels, driver side fine, nearside 9 and 3 o'clock fine . At 12 and 6 there is a little movement. Am i right in thinking its the top swivel pin. If so can i remove a shim with everything in place or...

Hello all, new on here although have looked up technical help in the past. 2004 td5 90