Search results

Will edit the post, but it's a squeal or kind of a rubbing noise and feels like it comes from the steering wheel itself. No idea how to diagnose in there. In regards to the Rangie thread: - Sounds very similar to my issue. - I'm in Australia and we've got Penrite PAS fluid here which is...

Solved! Thanks for all your help, I have some updates and replies. First off, some replies: I cleaned the idle air controller and it didn't help. Great call on air leaks, turns out there were many. Yep, you were on point. Smoke test showed it. You were also right! I replaced the injector...

Whenever I turn my steering wheel to the left (and only left) at parking speeds, I get a rubbing/squeal/whine noise in certain points but not all the way through. I changed the PAS fluid in the reservoir twice already, it somewhat helped after each time (never 100% gone), but then comes back...

Not to derail, but when I drained out the fluid in my PAS and ACE tanks the other week, I noticed that the plastic filter inside it was filled with black marks. I think they were on the underside (so not accessible via the top cap). Is it worth cleaning those/how? Spray something in? Risk is...

Would be great to know, yes please Andy! Thanks! Enjoy the drive and the new roof rack! Sick! (Which brand/style?)

Ah great tip thanks! Did you find out what size o-ring it takes?

I think that's fine. Better than nothing! Did you replace the o-ring of the filter? What size was it? What did you clean your filter out with?

Cool, was just worried it could start breaking down the PAS fluid later? React bad?

Can I spray it with degreaser or brake cleaner?

Oh! Which is the bleed nipple on the steering oil reservoir? Is that to get gravity to work it, or the ACE system itself? Does the car need to be on?

Yeah great tip! How did you get on with draining all of yours?

Do you still have this, how's it working out for you longer term? Did you end up fitting one? Which area?

Yep, thanks there are other leaks! But eliminating them one by one and planning in

No, intact and all good

How would you clean the valve? And where do I find it, what does it look like?

I've measured my suspension heights and something seems wrong Bump stop to axle bracket: Front driver 96/97 mm Front passenger 100 mm Rear driver 121/122 mm Rear passenger 125 mm The RAVE manual says that the rear (with SLS/air springs) should be 61.5 mm for the bump stop clearance. Mine is...

Found out this is the charcoal canister breather hose @AllanWorms

Thanks for the detailed reply! I've still got a few questions below (numbered). Edit: I also just read your post about lifting the D2. Really insightful too! Yep, I've got ACE. It's great! Mine are quite old, could be factory even, but only has 120,000km and hasn't been off-roaded. (1) Would...

Yep good question thanks mate. I want to replace the sagged front springs (got relatively new ones for free, but have 20mm lift), and also replace the old shocks in the front and rear. And keep the rear airbags. What’s the vehicle used for: - city and highway driving - long trips, future to...

Thanks mate, yeah I've heard this before, also with Terrafirma. What would you do in the back for the airbags? Spacers, or standard airbags, or 2-inch lift bags? Ride height sensors need 2cm brackets for extending? And I don't want to risk damaging shocks/coils/bags when articulating etc. -...