Search results

Hi Hippo , had oil leak around the base of gearbox , and the transfer box . Cleaned it up etc and checked it couple of days later . Same again , cut a long story short . It was oil from off side drive shaft seal where it goes into the gearbox , that was leaking and running down etc . Had to...

Hi Nodge68 Cheers for the reply , I added the additive as I thought the leak was from the gearbox ,as 3 of the bolt heads had oil on and around them . After cleaning it off ,it reappeared again etc .Today cleaned it off along with the transfer case . But I could see the fluid running down from...

Hi Freelance , many thanks for the reply . Was not to sure if the additive would help etc . Pingboy Hi Snagapuss Thanks for the reply, I was not sure if the additive would help etc . Back to the local garage then . Pingboy

Hi Freelance , many thanks for the reply . Was not to sure if the additive would help etc . Pingboy

Hi Again predictive spelling error . It should have read Wynns transmission leak stop Apologies Pingboy

Hi all , with reference to my last post gearbox oil leak . I have added Wannsee transmission leak stop . As first point of call ( cheaper option ) . The leak gives the impression it is from the gearbox & Transfer case ( oil looks like leaking from the bolt heads ) Have cleaned them off etc but...

Hi GrumpyGel , thanks for the reply , never been one for oil drips etc . Maybe I’m old school . Like things right ?? . Thanks again

Hi Freelance, yes did that last night there were a around 3 that I could nip up that was in the right place where the oil was . But nothing major as I believe they have a torque setting etc . Not been able to check today . But will check it over again in the morning. Thanks for the reply .

No probs, will have a look through the freelander posts . Though Nodge68 did say how to remove and put the sump back etc .

Hi Ian , ref oil running down plastic inlet pipe is that the one that is quite flat and wide . Runs down and past the oil filter ? If so then no oil on it .I cleaned it off a week or so ago , and still clean and dry . Filter is dry , the oil appears to be coming from around the bolts holding the...

Many thanks for the info ,Arctic2 there is a small area that has rust etc . Will have a good look .

Cheers Nodge68 , Thanks for the update .Will have a look for Land Rover gasket seal in a tube etc .

Cheers Nodge68 Nice to hear from you again , appreciate the info , just a couple of the bolt heads are covered with oil etc . And the gasket is the stuff out of a squeeze tube etc . Pingboy

Cheers , will check it out etc . Thanks again

Hi Kermit_rr thanks for the reply, was reading a few reviews on the { oil stop leak } most were good , only saw 1 negative one . Any how have not done a sump gasket etc , when putting the retaining bolts back are they similar to tightening a wheel , as in doing opposite facing bolts if you...

Hi All , anybody tried the Wynn’s oil stop leak additive ? . If so how did it do . Got a drip pretty sure it’s from the oil sump seal . Which is not the normal cork type gasket . But from a tube . Nothing from oil filter etc . Many thanks

Hi Nodge68, thanks for the reply , will check it out

Hi guys , been a while since I was last on , looking for advice on the following. Have just removed all surface rust off the chassis and struts etc also all metal parts on show. Then applied Hammerite rust beater . Looking ok , what is the best to use as a top coat , and can it go on everthing...

Hi all , have checked under the console and sprayed greased the gear selector ball in the housing ,also the there was a chrome rod which I sprayed as well . On moving the selector you could see the rod moving in & out etc .Under the bonnet you can see the selector rods x2, both sprayed etc and...

Hi Ian , thanks for your reply and the tip etc . Will have a look under the console . See what’s going on